Search results

The Topdon scanner was able to tell me that the rear n/s abs sensor had an issue. The warning triangle and abs were lit on the dash. I fitted a new sensor today and that has switched both warnings off.

It seems auto mode is for cars with CAN bus. My 2003 VW is pre CAN so I got it through manual selection of Volkswagon.

Following your lead, I tried European, Volkswagen and was then given the choice of System Scan or CAN bus Scan so I choose the former and that got the scanner working with the car. I'd been trying to let the scanner do Auto which presumably goes to CAN bus by default hence no play since 2003 VW...

This video may be some use. If not the correct year/model, there'll likely be a video to suit somewhere on YT.

Sadly, the ArtiDiag800BT does not seem to support a 2003 VW car's system. I did a scan and all systems failed to report.

If its any use, a shootbolt reset video.

If its any use, watch this.

I wanted to try a reset to resume normal operation. The heater hasn't worked for long time despite a new heater element, thermistor and water level sensor. All wires have checked out with my meter! Of late, Cotton wash cycles don't finish and go onto Rinse. I've had to time the wash then move...

Its a Bosch Classixx 1400 express. Can anyone tell me, if its possible to do so, how the washing machine can be reset please?

Try taking each lock point off the door frame one at a time and see how well the door closes into the frame with the lock points removed. From the photo, the sliding pegs look fixed so I'd guess any adjustment is on the door frame. If you have a locking spike at the bottom too, compare how far...

I invested in a Topdon ArtiDiag800BT. Sadly, the scanner does not seem compatible with my 2003 VW or my sister's 2004 VW both which are Bora TDIs. Plugged into the OBD port, the dongle is being activated yet it is when plugged into a 2019 Ford. Topdon have sent out a replacement scanner and...

I replaced all the glazing units in my 2003 built house when I moved in two years ago. Five had failed do I decided to change all. I suggest sourcing any glazing units from a glazing manufacturer rather than doors, windows and conservatories installers. As far as I'm aware, the modern glazing...

Had a look at my sister's house rear door earlier because one of the locking point claws doesn't work. When I removed the lock mechanism, the claw's gearbox is actually missing so the connecting link that operates the bottom locking peg is also disabled. What's the appropriate means to...