Search results

Good point and fridge and freezer not being on all the time, hadn't thought of that. As for hiring a generator for a day to try it, I'll see what's available.

Thanks very much, I used 5 just as an example. It would be under some kind of load all of the time from the fridge and freezer, the boiler only two or three times a day.

Thanks again for the helpful advice, I am now curious about fuel usage - let's say that I go for a petrol generator, 5kW to power my chest freezer, fridge and oil boiler (and maybe use any remaining wattage for the LED lighting in the bungalow or to charge a smartphone or rechargeable batteries...

Thanks, just managed to get through to National Grid, the issue has been logged and somebody will be out today or tomorrow. I hope that they don't want to turn off my power just to put the cover back on .......... :)

Ah, found it online: https://www.wt-henley.com/low_voltage_fusegear-pole_mounted_cutouts.html

I think it's some kind of fuse/cutout but not sure, here's a photo of the box and the cover that I just found near the base of the pole. I'm trying to phone National Grid to report it but of course the wait time is interminable due to all of the storm problems so will keep trying, in the...

What make/model do you have? Also (just showing my generator ignorance here) does it need to be run inside a shed, etc (with a suitable exhaust outlet of course) or can it be run outside in the rain, presumably with a suitable cover? Thanks for your advice (and the same applies to everyone...

Thanks - out of interest how much fuel did it consume per hour of use?

After the latest storm I've endured yet another lengthy power cut - this is the final straw, I'd now like to invest in a generator. I only have a small three bedroom bungalow and am looking to mainly power the essentials - chest freezer, fridge, oil boiler and lights. Some additional 'niceties'...

There was a change of plan and I didn't buy one after all, sorry.

I had in fact been thinking of a metal gate but I have one elsewhere and they're so bloody ugly. :)

Thanks to you all for the help and advice, that's given me something to chew on. To answer a couple of questions: a) The post has in fact just been replaced, the old one had rotted just below ground level and the guy who installed it did a lousy job and didn't use nearly enough concrete. the...

Can't get a photo right now as it's chucking it down with rain but it's a six bar and this is the same type in terms of appearance, the bracing, how it's put together, etc: https://www.batsfordtimber.co.uk/image/cache/catalog/Products/Gates-Posts-Fittings/11-Welsh-Gate-800x800.jpg

I have a 12 foot wooden field gate, it's about two years old, it seems to be a bit 'cheap and cheerful' and over the years I've had to use wood glue and long screws where some of the angled pieces are attached to the horizontals. Despite doing this it continues to very slowly droop over the...

It's highlighted that the installation wasn't as good as it could have been so why not bring it up to date? Also, as a double bonus, I now know a lot more about euro cylinders and handles for uPVC doors.

Thanks. I now have a suspicion why the bend in the plate happened - perhaps the original installer tried to minimise how much of the euro cylinder was exposed on the outside and tried to bend the plate and so raise it in the area around the cylinder? That's certainly worked, to a degree. I may...

I've been reading about 3 star, anti-bump, anti-drill. Avocet, Abloy ......... and now I'm even more confused. Which is generally considered to be the best?

As an aside, just been measuring how much of the euro cylinder sticks outside the plate - it's nearly 3mm. Apparently 3mm is the minimum needed for a burglar to break it. Just removed the euro cylinder and it's a 45/40 - it does stick out quite a bit more on the inside but that's no big deal. I...

That's a very good point - no it doesn't hit anything when fully open but perhaps it's been hit from the inside some time in the past, possibly before I bought the property? (or something occurred years ago and I've forgotten what it was). Or maybe the outer plate was once on another door that...

Thanks. How about the following pic (I guess I would need to replace the whole handle fitting)?