Search results

dont know what scotland is like and if any access issues seems high to me , but when i had this done on a bunglow was just before covid and prices have gone up since then £8,000 is a lot of deposit BUT how likely are you going to get the money back anyway - how did he pay , Credit Card, Debit...

if they dont have a connector to daisy chain , then you just take the drivers power to a junction box and from there to a switch is this modifying an existing light - or a new circuit - you may need sigoff when i setup my son-in-laws garage lighting - using daylight tubes - we wired up 6...

you can use an intermediate as a 2way as far as i can research - Never done that - i think as i dont know how its all wired up and its NOT setup as a 2way switch - just purchase an intermediate switch and use as a direct replacement maybe the 3rd switch has been removed and connected up and then...

is it only 2 switches that control that light - or do you have 3 you have an intermediate switch in the picture a 2 way does not replace that how do you know - anything else changed to the other switches do you have a mulitmeter and know how to use it - you could then test the switch

i gang 2 way - has 3 connections points available pictures of old switch and new switch may help - with wiring does it also have another switch to turn lights on off - so 2 switches did you take photos before you disconnected

i get a lot of shadows in my garage workshop - where i have 2 LED Tubes - Daylight colour - and so I also use a couple of lights on a stand to get close to the work - when th elights where on offer at toolstation

peter millard did a video years ago white is 4000K and not daylight - looking around 6000k for daylight which i prefer i have fitted a few LED tubes in garage for lighting when using as workshop & utility room - from screwfix and TLC tubes i cant see the tech spec to see if the driver is in...

we had it done by a fitter special mixer for the screed - i think it may have been 1200 https://f-ball.com/en/product/stopgap-1200-high-performance-smoothing-compound/ does not need primer and quite settings , so they coul do it in 1 day and then came the next day and laid the vinyl BUT may...

we had F Ball screed put over our uneven tiles floow in a conservatory - not sure if this will apply to your situation https://f-ball.com/en/smoothing-compounds/ But that was to put a vinyl over

cool, make sure it is a vice versa model - i ordered an vice versa from axminster (workshop) and what i thought was the same vice versa - BUT it is not just double sided i was sent , disappointing, i also think from various threads here axminster is in trouble , so i would not at this stage...

i have loads of tapes (DIYer) - Stanleyx2 on offer at screwfix , milwakie purchased on a deal at a fair , axminster on offer - thought it was different and was alonger vice versa 8m - BIT NOT SO BUT THE ONE I ALWAYS go for is my Advent vise versa 5m...

Will they sign it all off for you , if you do that ?

NOT a plumber BUT replaced quite a few radiators and have been caught out by not putting enough ptfe tape around i also now tightened quite hard as again , i have been caught out where i have been to aware of over tightening , and undertightened - pretty much on all the plumbing i do , this was...

its all very simple if the electrician is good and has the equipment , which they should have a Multi-Function Tester (MFT)...

and the ring may be disconnected somewhere else as a loose connection in the toaster plug should not have taken out the other sockets - see the link i gave for a ring main its powered both ways my daughters had this issue and they could not find where the ring was broken . i think it was just...

here for example

but not to socket ? 3 wires - in out and spur

yea thats my ikea box with handles to lock the lid , maybe it was not ikea i also have a few dewalt boxes when on offer NO idea if they fit ok - can check

will they fit into somehting this...

sounds like a plan for peace of mind - BUT it may take a while for an electrcian to visit make sure that fully uncoiled - should be ok , BUT i always like cables uncoiled - i have seen the result of not doing that a few times - big fire if have anything else faulty - then powering on/off often...