Search results

Is the stack also cast Iron. To change the Loo should take no more than a few hours. I always screw toilets down so they can be used staight away. But you will have to ask your plumber his intentions as a lot still bed them in cement on the ground floor if its a screeded floor of course.

Have you touched the thermostat on the boiler? Is the pump Working?

Contact Transco Price depends on how far away there gas main is. They will do a survey and come back to you with a price.

There is a space saving pan that comes off the wall at an angle dont know if it would help or not?

Thanks for your help Customer wants all pipe to be hidden, pipe runs per floor are no more than 10 mts per rad per floor. Idea was to have a bank of manifolds on each floor connected to the three port via 22mm pipe work. The only single rad over 10,000 btu is on the ground floor I can run...

Thanks Oilman for both posts Brian

Hi me again Can anyone tell me The best way to test the limit stat on oil boilers without endagering life and limb by taking the boiler to its limit temperature. Thanks Brian

Thanks for all your lovely info :lol: Customer wants sealed system, customer wants plastic micro bore Anything technical to add. Breezer yes I have lol Brian

Hi Apart from the usual possible problems with micro bore sludge build up etc, Can anyone advise me of any other problems I may come across when fitting a sealed system with 24 rads all in micro bore hep2o. Thanks Brian

Hi I doubt very much that your cylinder will be big enough to cope with 3 showers. But it all depends on the water output of the pump and how long you spend in the shower. An unvented system is good advice but expensive, or can you fit a larger conventional tank?

Hi I have been asked to fit heating system in a large house approx 20 25 rads. the customer does not want pipes coming up from the floor, he would like them coming up behind the plasterboard wall then out horizontally to the rad valves. Would it be ok to run the main pipe work in 22mm then...

I would charge from £50 to £70 depending what the system looked like new old or one big problem waiting for me to touch it.

The standard domestic rad valve is 15mm so I dont see you having a problem changing radiators.

Do you need to change the pipe size

:lol: looks like you are right breezer

The level in the pan is set by the shape of the pan and the height of the ceramic pipe that the waste pipe fits onto. Your plumber can do nothing to control this height and you will be wasting his and your time by calling him out.

how low is the header tank connection you may be sucking up crud from the bottom of it There you have a reply :)

Never had a problem with them yet (touch wood) make sure you use the inserts if using speedfit pipe.

Thankyou kind sir I am forever in your debt. So dont ask to be repayed lol :lol:

Hello In the Boulter MI's what are the flue distances in brackets please Thanks Im feeling a bit thick here by the way :oops: Brian