Search results

If I looked like that I wouldnt be doing this job!!!!!! :lol:

Yes I think you should treat your system if you have sludge in it then get it out asap.

yes I suggest you try plumbingpages, it will be amusing to see the replies you get

throw it away put a quarter turn pegler valve on it

why limit yourself extend the pipe work instead

Not bizzare at all coke has phosphoric acid in it.

Not usually as long as you wind them up even, use the silicone

if you live in a hard water area then your exchanger could be blocked. or the diverter valve is faulty and not opening fully. or the micro switch that the diverter activates is faulty. Try them for starters. more information will help pinpoint the problem. as Im only guessing you have a...

If its a sponge washer replace it with a rubber one. make sure the surfaces are dry and then smear some silicone on the bottom of the washer where it sits on the pan.

what response would you like if you are asking for an installer then tell us what area you are from.

Was the old toilet cemented down? If so you may find the plumber has lost a lump of cement down the waste hole when he was cutting it out.

Thanks Oilman

any ideas where to get a good priced combimate on line

Just wanted to say thanks for the advice about swatting up for the Oft 600 it made the assement a lot easier. All done now for five years Best Regards Brian

I always use emery cloth, it takes a little longer than a file. but the finish is smoother (less chance of damaging the o ring).

If it was ok for the first year, you may find the whole system now needs cleaning.

My suggestion to you is line up the heating engineer who is going to commision the system, and work with him most will be a lot happier to commision your system if they know what you have done is up to spec dont forget you will need to get building control in.

The problem with this set up as I see is, If you just want cold the pump will still be trying to push the hot through and vice versa probably decreasing the pumps life.

Then you must have a fortec tank? Is the cold tank built in and on top of the hot. If so what size is it (should be a badge on the tank somewhere to tell you this)

descaler £3.00 to £10.00 New valve £80.00 I know what I would try first. :D