Search results

Do you know if its a Combi boiler, or a system boiler, with tanks in the loft and a large copper tank somewhere ! More info needed, like model of boiler ect.

Sounds like the movie, Valiant, pigeons in the flue!!!!!!!! :roll: Dave.

Nowt wrong with Worcester Bosh, but you will be amazed the amount of people down here that shy away from them, especially the CDI range. Dave.

Elmo, i have read your post, and to be truthful, and its only my opinion, but others may disagree. I don't know a great deal about your boiler, but just because a chap says, or advertised hes a "combi specialist" means jack **** !. To be fair, most combis work in the same manor, but as...

Some people,,,,,,,, i ask you ! Typical individual, wont pay the money to get a competent person in, then moans that the FREE info he / she gets from the internet "Good info" i might add, is not what he wanted !!!!!!!!! :shock:

How many spondoolys are you prepared to spend.... :)

:lol: like the wisdom Dave.

You will probably find your neighbour has swapped the original burner, for the main burner, of a Harrier Jump Jet :wink: As said stop moaning, and how come you know more about your neighbours boiler than they do ,mmmmm :? Mr nosey, me thinks :( Dave.

Many thanks to you too, Gasgeezer, fking Vaillant tech are nowt but out and out liars when it comes to known boiler defects. Dave.

Thanks Chris, i do remember now "Stupid me" . Thinking about it, i changed a H / E a year or so ago, and the seal at the back was different to the one i took off. Just to say, the customer has rang me today, to say its leaking again, yet i worked that boiler hard for at least an hour...

Thanks for info too.

Tony any ideas, Was working on an Ecomax, customer reported a leak. Went there, and as usual, as i have found before, the inside looked bloody awful. It was obviously the condensate leaking inside the boiler. Traced leak to the nylon / plastic union nut underneath the H / E which...

I can give you a bar of soap, and a spare blanket if you like :wink: Jesting, give us some more info on what you call "breaking down " Dave.

What lights do you have showing on the front of the boiler, and what are they doing ! Flashing, constant or what. Dave.

Could be air locked, is the pump running ? Dave.

What a naive view. No not naive, im also very aware of the in,s and out of the political bullshit. :roll: I was was merely pointing BOB.DOLE in the direction i thought he was trying to go ! :roll:

Me thinks, this is what your on about ! It is a Government priority to ensure that existing and new heating installers are competent to install and maintain energy-efficient domestic heating/hot water systems. The White Paper ‘Our energy future –creating a low carbon economy’ dated 24...

Part P of the building regulations is intended to increase the safety of households by improving the design, installation, inspection and testing of electrical installations in dwellings when these installations are being newly built, extended or altered.

Totally agree "Tony" , like i said i haven't had the fortune to work on a ecoTEC, as yet. The reason i ask, Vaillant sent me the usual literature regarding the ecoTEC, this morning, as i do breakdowns for EGA, WARMFRONT, ect. Most of which is either Vaillant or " dare i say it " IDEAL ...