Search results

  1. C

    External Render

    I would use sharp
  2. C

    External Render

    Hi mate The way i would do it is 5-1-1 don't forget the lime helps with movement and reduces the risk of cracks Give the wall a good dust down then soak the wall Put up a 5-6mm scratch coat let it start to set before applying the top coat give it another watering 6mm top coat...
  3. C

    Plastering over Artex

    Thanks everyone great help all points taken on board and yes roy c i do have youth iam my side :lol: at 24 still have loads to learn cheers all
  4. C

    Plastering over Artex

    Iam not sure they gave me measurements over the phone and i popped in afterwork doesnt seem right but didnt want to say anything so i thought i would price it on day rate
  5. C

    Plastering over Artex

    Cheers Roy what would you think would be a reasonable price for that as i work for a company and don't get involved in the money side of things its around 35 square metres
  6. C

    Plastering over Artex

    Hi all, Just been to price up a job that i'm in two minds about, the people who own the house have plastered with thick textured paint, with high spots of 7 mil all over Ceiling, walls and reveals. They are selling the house so they want it done as quick & cheap as possible. Any advice would...
  7. C

    Any tips?

    cheers mate :lol:
  8. C

    Problems starting car after not ran over Winter 2007

    New batt should do it or it needs to be tested under load(drop tester) :)
  9. C

    Any tips?

    Point taken cheers :wink:
  10. C

    Any tips?

    Roughcaster and rabbit poo(or something) may pay you 2 to get out more lads? :lol: you both may want to learn to read as richard c didn't have a problem reading it :shock:
  11. C

    Zetec engine problem

    Some times the spark gets weak under load
  12. C

    Any tips?

    Brilliant richard thanks mate good to get some feed back from other plasteres :lol:
  13. C

    Any tips?

    Thanks roy c good tips and ile try them.Another question when your skimming a large area whats the best way of joining if you have to do it in 2 sittings if you know wot i mean. cheers
  14. C

    Zetec engine problem

    Yeah sounds like catalic converter blocked put your hand over exhaust(be carefull hot) see how much pressure there is.All else fails replace plugs leads and coil wont hurt it
  15. C

    Empty coolant reservoir - help!!

    Hi you could go to halfords or prob best go to main dealer the price difference wont be a great deal but quality will.Just make sure you bleed the coolant system before driving make sure fan cuts in
  16. C

    Any tips?

    Why? have you tried it :lol:
  17. C

    Any tips?

    Hi iam a newly qualified plasterer (nvq level 2) but was just woundering if anyone had any handy tips as always wanting to learn new ways and ideas.
  18. C

    corsa 1.4 sport engine problems

    TRY THE IDLE AIR CONTROL VALVE COMMON PROBLEM :D
View older results
Back
Top