Search results

the pins actually tell boiler what rate of gas to burn and what type of boiler it should be, so if you dont get the right combination of pins(and there is lots of diff combinations) then you might turn ur system boiler into a combi or vise-versa. more importantly u if u get wrong combination of...

looks like sumthin u get out of a kebab shop

on a service your engineer should fully strip burner out on this boiler to check combustion insulation, otherwise you will become aware if it has failed when it has burnt a hole through the heat exchanger, on a more positive note get him to check the expansion vessel during his service! - might...

a gas appliance should be serviced at least once a year, as for what is involved ; several checks of all that is involved concerning the safe operation of a gas apliance.

LOL, think your missing the point of the 'Safety check' Open flued appliance? pretty dangerous in the wrong hands! defo dont do yourself, only riskin ur OWN safety!

Nice one - never thought of that - i have tried Jewsons, travis perkins, keyline, and one or two others smaller ones. none of them have it, Ideally want the bead type.

hey there does anyone know where i can buy expansion joints for facing brick?

Hey there, build a small garden wall , put a scratch coat on and now time to roughcast it, just a couple of Qs, Is it best to put coping stones on before or after roughcast? Can anyone recommend a pre mixed coating that will ensure i have correct mix of base coat? Thanks

Kool, just gona get my builder to do it! dont wanna risk making a mess of it!

Ok - New Extension build internal garage 5m x 3m, Ready to pour my garage floor, looking for wee bit of builders info!? 1 - How high do i bring the height of the floor upto? Do i bring it up to below/same height / or above the DPC? 2 - How deep should my hardcore be? 3 - What type of...

Hey there I used to have sky where i had a basic y spliter from the signal output of the box so i can get signal in two rooms, Changed to Virgin as sick of SKY poor customer service. so i have the samsung HD virgin box - am i able to spilt the output signal of this box? - looks like only a...

It isnt the hardest part to change but bulky to remove and takes a wee bit shaking around! : Flue Bend needs to be removed and the fan, drain boiler down, water and condensate connections, Defo a job for Gas Safe Engineer

Condensing Hex is prone to leak on these! An easy way to test is to turn boiler off, isolate it from system, disconnect condesate connection( a job for a Gas installer - as it is connected to Products of Combustion!) If when condensate connection is disconnected and your getting a steady...

If your going to be spending that amount of money on a fan and a pcb i would suggest u get ideal to do a fixed price repair! could save u a small fortune in the long run!