Search results

Try linking out stat on boiler, to check boiler is ok, press i button when trying c/h what does it display Paul

How long do you leave the hot water on for, what is your boiler stat set on. Paul

Check cylinder stat is at 60 degrees, Does boiler fire up for hot water only. Paul

sorry we cant give you gas advice, call a heating engineer in. Paul

call a heating engineer in as you dont have a clue, could told you its not the pcb Paul

pcb or loose connection into pcb Paul

+1

if your losing pressure you have a leak. top up boiler to 2 bar shut off iso valves underneath boiler {turn off boiler as well} leave over night, if pressure has gone down then you have a boiler issue, if not gone down open iso valves and if pressure goes down you have a leak on pipework...

Blocked cold feed Paul

Can you use DS 40 on a flexicom Paul

sounds like you have a dead leg Paul

Cant give advice on gas work, get a gas safe engineer out to do the work.

Is it a dab pump you have fitted, if so have you got it on the correct setting, also are you sure pump valves are open Paul

Sounds like you have turned the cold feed valve off, check the valves you have turned off and make sure they are on. Paul

F22 dry fire, is there water in the header tank, also you might have blockage on cold feed pipe. air in the system Paul

You should be calling out a boiler engineer , if you need to ask what the fault is then clearly you dont have a clue!!!!! and should not be working on the boiler !!!!!!!!

Push fit are for diyer's , i would always use copper , its ok to use push fits if you can get to them Paul

Thats why i have stopped giving advice on here now, just had my van serviced parts £70 , total cost £200 but your paying to get the job done right. you dont hear me moaning Paul

To be honest could be a few things wrong , best to call a pro in Paul