Search results

Need to see underside of boiler, that will be where the isolation valves are.

What area are you ? Do you not have a contact list of tradesman you can turn to in an emergency ? Or local family and friends. Sounds like a leak on the cold feed to boiler. Usually a valve on the underside of the boiler to isolate. Then open hot tap to kitchen sink and drain / let pressure go...

I take it we have just had a public survey that was kept quiet because they did not want too many negative replies. But they can now claim to have consulted interested parties.

You are now required to specify radiator size and output for lower flow temperatures so you are prepared for a future heat pump install. Builders are often ****s who work to a "price" . They screw the subby down on price and add their mark up on. Probabley should have put another radiator in...

Or get a drain expert in to do it properly. Not really a diy project.

Could also be the thermostat is failing in the mixer valve.

Get a second opinion from another recommended heating engineer. Ask family and friends who they use and trust.

Radiators should be sized to provide the correct heat output necessary for that size of room. Trying to heat it quicker, then make sure your flow temperature is set high . But once at temperature , the boiler will shut down more often and cycle. At lower flow temperature the boiler will stay on...

Can be range rated on central heating to what the heating requirements of the property have been calculated at.

large house

pump set up

meter box

2024

2024

column rad

heating

column rad

boiler price rises 2024

Keep records of these phone calls , people you spoke with and advice given for future reference. If problems arise later on, very often if there is no paper trail , the conversations may be denied. Not trying to be negative, but know people who have been shat on. You seem to know your way around...