Search results

Bosch SRS56A08GB/08 When turned on display shows time left in minutes and you hear the pump start up,dishwasher is drained of water ok,tested the drain pump and its fine. The solenoid fill valve is not opening,it is getting 70v ac. The solenoid has 240v stamped on it,what could be causing the...

WXLM148AGB/19 Mrs was complaining washing coming out wet after the spin cycle,sucked out the xs water with wet vacuum,put into spin cycle and could see pump spinning away. On the spin cycle the pump starts for a short while,starts spinning for a couple minutes,at what does not seem like the...

Batch numbers match up,will see what its like in morning,luckily theres enough left in this tin to re-coat the other room,would of thought expensive paint like this would of been a better match between different cans though.

How long does it take for dulux trade mid sheen vinyl silk emulsion to dry to its final colou?I ask this question as last week i painted the front half of the lounge with this paint in magnolia,today i painted the other half from a a new tub of paint,after 12 hours todays coat from the new tin...

Have a 2 gang dimmer switch,one side does the lounge,the other does a landing light (2 way) been fine for years,last night turned on the lounge light,bulb blew and tripped rcd,removed the bulb reset rcd and the lounge light wouldnt work,tested the switch to find landing light worked but no...

Are there any suitable timers available which could be fitted to a bathroom extractor fan to give it an over run feature,the fan itself is up in the loft with wioring acessable,something suitable poped up in google but it was 120v not 240v

Start up the pump bleed air from it should start circulating the water whats allready in there and system should start filling up,in extreme cases where nothing will work conenct hose pipe to a drain point on a radiator downstairs,open drain point then turn on water suply to hose and it will...

Got a 9"x6" vent cover over the air brick in my bathroom,i now need to fit an extractor fan,is there some kind of mounting plate which will cover this hole and let me fit an extractor fan?or would i have to make one myself?

Have made the joint with an f connector,but have found out off another site that no matter how you join them it will allways effect the voltage being sent to the motor even though joining for a normal non motorised dish works fine

Fitted a new motorised dish today but had to extend the coax cable,the this extension in place the motor is getting no power,tested the sat receiver in the garden connected with a short lead and it worked ok,anyway of joining cable so power still reaches the motor or is it a case of running a...