Search results

Usually she roams upstairs, we lock the kitchen so she cant have access.. but there are days we leave the kitchen open for her so she has free roam of the house. In which case I'd just need my door contacts arming. There's days though we take her out with us so would need the entire house arming.

I have 2 Areas, 1 upstairs and one Down (A&B) Yes Areas are in the same building, just doing house for now. If doing full set, yes Dog will be in She usually rooms upstairs (need Stairs PIR Omitting) - However when its hot weather we leave kitchen open for her (Kitchen PIR to be omitted), Part...

ok I just need to program it all up then, so are you saying not to use arm suites ?

Ive disabled Auto yes as it wasnt working how I wanted it too, basically Ive go tmy night time part set which arms my kitchen and front door thats perfectly fine, then I want a full arm (but with Dog in ? ) so if the dog is in the house we can omit either the Downstairs PIR or the Stairs. I want...

Thanks for the @sparymarka ive been looking into it. I've setup a part arm called Night Time, which arms my Door Contact (Front Door area A&B/Entry Exit 1) and my kitchen PIR (Area B/Guard). Works fine. Have setup this in Areas/Arm Suites in Wintex. I'm struggling to get my Part Arm "Dog In"...

Ive figured mine out, ive mounted a door contact onto PVC above door, then mounted contact on the top of the door PVC itself with door contact facing upwards of door contact. Works fine.

I have a similar problem, I can mount my door contacts on door fine, but there is at least a 10mm gap between the edge of the door trim and the frame. The other contact that sits on the frame is exactly flush with the top of the door so the door contact on the door itself is a long way off...

Good morning guys, Sitrep, had a ploy last night i had a loose wire on one of my tampers which stopped system from arming all sorted now with no faults - keypads set to 1 & 2 and zones / areas mapped as they should be. Ive got my prox fob programmed now too, how do I get my fob to do a full...

Cool, have changed the dips... should be 1 & 2. gonna leave it for a bit now have a look at it again later!! Cant thank you enough!!

OK I have no idea how to recode them, however I just changed the upstairs KP Zones to correspond to what id setup in the panel and now my PIR is working :)

Downstairs is 002 and Up is 003

On keypad Zone 001(panel1,2,3)-003 are all Tamper - 65k... Zone 004 N1,R2,1 is Active, 05 Tamper, 06 Secure, 07 Secure, 08 Secure,

ok will check and report back thanks fellas

Yes it may be just, hopefully we will soon get to the bottom of things! I really appreciate all the help

One photo coming up...

ok, panel is a 2012 will have got PIRs etc that time too. According to the manual in the box for PIR JP3 remove jumpers for EOL... However Ive just removed them and no difference. Ive turned chime on on both Keypads. :( the system wont let me arm it, just a single beep.

DT model number is... PD6662

Ill check th I will check see what model they are.....

Ive fixed my RKP Tamper problem, KP wasnt seated quite right so back button wasnt being depressed. Still says engineer is on site though lol

Right Ive got zone 1 on keypad mapped to zone 2 on Panel and Upstairs RKP has zone 1 mapped to Zone 3 on panel which I have set as guard. As for door contact I have 4 wires, Ive used Black/Red for A and Blue/White for T... Chime isnt working at all so im wondering if the contact is actually...