Search results

Hi Baxpoti, Many thanks! I will be trying this test today. Though in above sequence I omitted to add that during the various heat up cycles I did increase the Boiler stat from from low to high. This seemed to increase the temperature of the Flow/Return as the boiler 'burnt' for a while...

Hi All, I have a Baxi Back boiler 50/4E Gravity fed hot water paumped CH system with a two port (Honeywell) valve on the hot water return. Right that's the system, heres the problem. Timer 1 7am-9am Boiler fires up heating and hot water works fine swithces off at 9am no problems...

Hi guys, Many thanks to both Adam_151 and JohnD. I'll try soldering first, I'm pretty competent at that (Electronics Engineer for 30 odd years) and heatshrink the ol' G&Y sleeve. Then do a check. I must check out the Low ohms meter, I have digital one from Hewlett-Packard (worked for...

Hi People, I'm replacing some wall lights which are double earthed. (They are plaster uplighters.) I'm replacing them with metal/chrome fittings. These require an earth connection. The previous installer has trimmed the earth wires right back into the wall. So there is 'little' slack. I...

Hi, I'm new to this forum. I hope someone can help I have following 2 questions. 1) I have had a Patio door removed and a window fitted to replace it. This has involved bricking and blocking around and under the window. The room is plastered with base coat and top. The plasterer wants to fill...