Search results

Which one you think is it on the photos?

Photos of the rear

Hi John, Stepping back a bit. Is this usually refer to the front or rear side of the car?

All Need a bit of help. Car just failed MOT for the title reason. Are those linkage near the front wheel as I'm getting confused. can anyone confirm if are those marked up on the photos? Thanks

Hi Everyone. I had a lead lock leaking and decide to replace it. I know few years ago plumber also struggled to get it working and keep tightening it worked fine for few years. With cold weather it started leaking again. I looked into it and decide to replace it. First issue is that the pipe...

I'm redecorating a bathroom after a water leak on the floor above made some small water damage. Sealent completely detached from the plasterboard and I was wondering if it would be better to use caulk to cover the gap and make better finish between vertical tiles and ceiling? Caulk can also be...

John, look like part number for this model accordingly with L&S Eng was A411-000141 and there is no chienese version. Not sure if that was would work but I got it working :) :) :) I removed the coil and cable. put new plug connector and reset distance. It's started at first pull

I may sound stupid but I purchased an Echo strimmer alongside few other tools I need as spare repair that only needed service as not used for a year. Strimmer is an Echo GT222ES and look like had very light use but there is no spark. I can read around 2 OHMS with multimeter which seems...

Boring but make sense to re coat all ceiling otherwise will look odd

I was gifted a mouldshield fungicidal matt Dulux trade can several years ago and paint has been great. I now need to do some touch up on my bathroooms but they only sell 5L can and cost close to £100 I was wondering what you guys use that keep same quality and spec without spending a fortune...

I'm in the UK and this was installed on old summer house door that I'm restoring. The one in the photo was still screwed in and the other one missing. In inches you correct 5 x1/2 Can't anything 1/2 wide It is flush as this was inserted on the side door to make it flush otherwise you...

As per title Looking for simar flush latches as per attached photos. Any idea where could find those as new one seems to be bigger and wider than my doors

I guess you mean Acrypol https://www.wickes.co.uk/Acrypol%2B-Grey-Waterproof-Roof-Coating---2-5kg/p/167556 I can buy one in the morning. What would be the process? Paint with acrypol and stick the small piece of torch on felt on top or need to be melted down with torch? Do I need to remove...

Any one to help?

Hi, just found out I have a hole likely made by punching something by previous builder. The holes is per attachment photos. How can make a good repair without replacing all thing? Thanks

Got to power a summer house down the garden which is something like 70m lenght cable. A 3 core 4mm cable would be adequate for standard use like heating during the winter and few utilities like laptop kettle etc etc. Thanks

Anyway only way can get it back to work is a new crankshaft assembly and plastic crankshaft seat. If anyone here have anything from a husqvarna 40 45 or 240 245 strimmer that want sell cheap let me know. Thanks

I haven't check with any tool but looked fine. Also the original crankshaft plastic seat are still there even if in bad condition.

Same mix used on disc cutter and chainsaw. Good oil 40.1 mix Completely destroyed the bearing and new piston also look crap on the top as been compressing metal

Using that sealent even if I put if very carefully and small quantities was a very bad and costly choice. I let is dry for over 24 hour before first crank it started at second pull and I was very happy. I let it idling for good 10 minute and then started to accelerate slightly then suddenly...