Search results

Regarding screwing the plates to the brick piers, should I use normal nylon raw plugs to should I use the stronger metal sheild anchors, as they 5 bar gates will obviously be very heavy ? Thanks

Thanks for your responses. Can you tell me how I would attach the bottom band on a a five bar gate, as I don't beleive that any of the horizontal braces are wide/thick enough to take a band hinge ? A picture would be very useful if someone else has done this !? Thanks

Hello, I want to hang some 5 bar gates on our drive entrance piers. The piers are 18"x18". Can I hang the gates directly onto the piers, our would it be better to mount some wood onto the pier first and then screw/bolt the fixings onto the wood ? Many Thanks

Hi, We have laminate flooring in our Kitchen/Dining room and have noticed that there are alot of small scratches on it, not deep scratches that you could fill, just surface scratches. Can anyone tell me how/what I could use to polish out these scratches or will I just have to live with them...

The boiler is a baxi barcelona condensing boiler.

What if I where to leave the heating control, on the timer box, to be on CONSTANT HEAT. Could I then wire the Receiver in tothe existing thermostat wiring ?

Hi, I want to replace my existing room thermostat with an RF one. The existing one is in one of the warmest rooms in the house rather than the coldest room. We have TRV's on most radiators. So I want to put the new RF Room Stat in the coldest room that does not have a TRV and then control the...

Hi, We have recently moved into a house that has a condensing Baxi Boiler (not a combination one), and also has TRV's on every radiator. There is also a Room thermostat in the hall way. The room thermostat is suituated directly opposite the hallway radiator. Due to this the thermostat is...

Has anyone got any tips for stopping a chipboard floor from creaking ?

Hi, I have recently purchased a new internal pine glazed door and after cutting it to size, I have noticed that it is warped. I can not take it back to the shop as I have modified the door. Can you recommend any way to un-warp the door ? I have heard that laying it flat with pressure on the...