Search results

Have left it till tomorrow will get pic and post cheers for replying

TattooTattoo

Hi the ceiling light in my bathroom is an led inset unit, one of the bulbs is out can anybody explain how to change the bulb it's not the ones with a circlip holding the bulb in fact the bulb doesn't move it seems the full light unit has to be pulled out the ceiling when I try this it comes out...

Drain

Hi quick update after speaking to a guy at work he said all i need i a Y connection screw this to valve then screw outside supply hose to one side the connect a 15mm to 3/4 valve to shed supply pipe then screw a 3/4 to 3/4 flexie hose to join them up Is this possible would it do the job Advice...

Hi need advice I want a water supply to my shed I've already run a pipe plastic hep 20 think it was called to the shed, under the sink in the house is a valve connected to a washing machine hose that supply's outside tap what would i need to do to use this to supply both what connections would i...

thank's for your reply's

Hi Ive found about 25mts of cable and would like to know how to tell it's size the cable is stamped on the outside 600/1000V 3X6 BS 5467

Hi here is an update got the roof done with torch on felt, this is the next stage Im going to insulate the the roof in fact the whole shed will be insulated this is my plan for the roof the joist's are 150x50mm leaving air space of roughly 50mm there is a gap at each end of the joist 50mm for...

Hi Iam planning on insulating my shed roof with 80mm kingspan boards inbetween the roof joist's the joist's are 6x2 what would you recommend is the best way to proceed to minimise condensation the shed will be heated all year Cheers

Hi the brickie thats building my shed wants to set the joists in between the block level with the top then nail down the ply is this the best way I thought the joists would sit on top of the blocks also do you need nogins between the joists the roof is 6mts x 3mts sloping from 2.4mts to 2.1mts

Thanks for the reply catlad, yes thats what i intended doing ply felt then the batons then the tile just need to know if there is enough pitch for roof tiles but you think it might be to shallow Any other opinions welcomed

Hi needing some advice iam getting a brick shed built in my back garden i would like it to have concrete tiles on the roof can anybody tell me if the slope of the roof is enough the size is 8ft at the front sloping to 7ft at the back the width is 10ft the joist size is 6x2 with half inch ply on...