Search results

If you don't want any tiles off, simply slip a soaker on top of the eave and under the first tile . On each bond . Make them long enough to form a hook over the top of the eave tile. Fyi they are Marley concrete plain tile in smooth grey , still available.

As above eaves are off bond .

There are plenty of vent tiles to suit Stonewolds . But , the stonewolds are laid below minimum pitch from memory. The lowest pitch vent tiles I remember is 17.5. Why not go for a lead slate , pipe and mushroom cowl ?

What tile do you have ?

Soakers as re in place . Flashings have been partially messed with .. moss Removal ?? It's asbestos slate! Did they not pick up on that ?

Drill and re thread the holes , then new bolts . Pretty straightforward

The quotes are expensive . Then it's not cheap to work anywhere in SW. We work on a couple of churches in SW 1 Fulham 1 Putney . Khan makes things even worse ! I would not say it needs a new roof , the roof isn't original . It had redland 49 tiles on it , the parapet has a clay hip tile...

Deck has failed not joists .. original deck was Likley chip board and un vented.

If you in sheltered area then nail and bed the verges. If it were my house I'd bed the ridge and use an purpose made plate and Ss screw at joints , drill and screw the last ones . It's very rare to see eaves clips these days , they used to be integrated with the reforms .

What tiles do you have

Decks gone. New roof needed Grp is for boats

Try and move the pipe , if it's moving on the ears I'd take the pipe down and refit to suit . If they are sound cut and fit an eared socket before you do the lower work . Job done

How many tile courses did you end up with ?

we are currently involved in a property in the new forest. Listed so not run of the mill , all the ridges are being replaced as existing are badly damaged. We are having perfect replicas made . there are 55 ridge at a cost of £5200.00 just for the ridge, plus labour, scaffold is in place...

Cool , I'll keep recommending them you keep clearing the channels and we could do ok

A picture would help .

Not so

Seen that on Cambrian slates , busted channels on edgemeres but not the senior slate . I'll keep my eye open on that. I have seen blocked channels on moderns and stonewolds and others but they were generally over 20 years old. The condron senior has not been available around here that long ...

I would use NHL 3.5 and a 3 to 1 mix with a good washed aggregate. (Wareham washed we use depending on stone) We generally use st Astier lime as found it consistently reliable .

Size 420mm X 330mm Minimum Roof Pitch 17.5° (UK – see tables below)* 22.5° (ROI – see tables below) Maximum Gauge 345mm Cover Width 300mm Covering Capacity 9.7 tiles per m2 (at 345mm gauge) Weight per 1,000 tiles 5.00 tonnes Laid weigth per m2 48.7 kg (at 345mm gauge) Minimum...