Search results

wot model is the boiler ??

oh thats me trying to be clever lol... never mind .. failed again . :)

low pressure/wrong materials etc etc .. they are just not designed for it .. unless you use these : http://www.piping.georgfischer.com/index.cfm?uuid=ED3EC770C88F4C0E913BC5E34E4BCA41&o_lang_id=2

you can elevate any tray .. butthe ones you are after are also fairly common andgive good access to th trap .. for later on in life .. there is a small range here.. http://www.plumbworld.co.uk/55-0000

oh .. i felt lonely and wanted to join in .. :( lol

no !!!!!

sometimes u get a leak form the filling loop wen filling a system .. it should stop wen u stop filling the system .

wickes and b&Q maybe ?

does anyone have access to the above site .. and maybe have copies for us .. u never know ur luck .. :) obviously at a cost agreeable to both parties . :)

laptop everytime m8 .

i am guessing u have a card meter and u have letthe gas run out .. reset the boiler ..should be ok ... the pressure should be 1 bar ish .. the needles are not very accurate .. on these .. so check the digital display for an accurate reading ..

always better to replace but there is a tape u can use as a temp fix .. i forgot the name call in to ur local merchants and tell em ur problem, it is a black tape with bitchamin on it .. sticks like shi te to a blanket . :)

fixed it .. short in the pump harness .. didn`t show on test ... replaced and all ok now .. thx for the above .. john

turn it off and call council tommorrow.. they will fix or replace. .

just ignore the manifold .. and go before it .. remeber to balence the system to allow for the new rad .

as above it is running the wrong way . :(

i would send it back ... i did a job last month i was sent 6 scratched baths ... lol.. wot i mean to say is the moral is when it is fitted it will be in there 10 years plus .. u want it 100 % right .. first time

flashband is rubbish .. lead is better 100% lead...

cheers ladds for the fast replies.. i have swopped the pump head already.... no external stat...... boiler stat only .. and the heating runs for maybe 3 to 10 min .(varies)... also the boiler is plugged in and the fuse in the plug has popped to .. once.. 3amp in the plug head.

yes i would go before the manifold into the 15 or 22 and run 15mm to the cellar .. :)