Search results

Ok thanks for your help

Ok thanks - is that quite easy to do?

Each has a built in sensor but they're wired to run from one (so one sensor is disconnected). They worked fine for about 2years and then started doing this. I'm not sure if the bulbs came with it or not - they were supplied by the electrician who worked on our extension.

No, it's built in like this one:

Thanks @terryplumb would you replace the PIR or the whole fitting? It's a little round ball thing - only about 2cm wide?

Hi, can anyone tell me what's causing my front lights to blink like this? They're 2 identical lights wired to run from one PIR. This blinking happens as the lights turn off. When it first started happening it blinked about 4 or 5 times, now it's more like 15 or more. Any advice appreciated...

Your replies confirm my suspicions, thanks.

Hi, anyone got any ideas on how/where to sell a Lennox warm air heating unit? It’s c8years old.

Hi, how do I remove masking tape adhesive from oak stairs? Previously it's been sanded (which just made it smooth, didn't remove it) & varnished over once. It's around the entire edge of the bottom step. Looking for product & method recommendations for the quickest way to remove it so I can...

Perfect, thanks.

Can anyone tell me where I can find the official guidelines around cavity wall insulation, gas appliances & ventilation. I have a gas fire where the chimney removes the fumes and is 6.9kw input. In the past I've been advised I need a vent fitting but reading on forums etc, this is only needed...

Hi, We've sprung a leak where rain is dripping in adjacent to the soil pipe. We're having the full roof redone later in the year so don't want to spend a fortune patching it up. What's your advice on how best to do it? And can I do it myself? I was thinking about buying and fitting one...

Changed the kitchen downlights from 50W to GU10 LEDs, very impressed by the results, so decided to buy some Lumilife LED 5W MR16 bulbs for the bathroom. but these flicker when switched on. Do some research, find that its related to the transformer. Get in the attic, find that each downlight...

Background is: central heating is a warm air system, so an independent warm air boiler in the kitchen. Hot water is currently provided by a timed electric immersion heater in the airing cupboard with feed tank in loft. For space saving reasons, want to get rid of the immersion heater and have...

Am sure there's a way to do this, I just can't think of it so need your help... I'm fitting a roller blind's brackets inside a window recess. I could fit the brackets to the UPVC window frame but am limited on space and it means the blind will hit the handles when down. So, I want to fit...

Hi, The outside of my house has decorative bricks on it which have an uneven surface. How do I fit hanging basket brackets to that? Any advice appreciated!

Thanks everyone - looks like I need a nice new wide brush! I'll be back on here if that doesn't work but I've renewed hope that I don't have to resort to coving!

Having huge difficulties getting a straight line where the wall meets the ceiling when painting the walls a different colour to the ceiling. Have tried masking tape - it pulls off the paint it's attached to (it's dry and has been for over 24 hrs. Have tried a straight line gadget from...

Thanks Roughcaster - I expected it about the mortar and paper but am surprised about the adhesive, although to be honest, I am not sure it is adhesive. I've uploaded a photo and would welcome your view...the dark patches are pink plaster, everything else is pale - do you think it is adhesive or...