Search results

Cannot see any vents?

Hi guys I removed a radiator the over day and then refitted and refilled but could still hear air in the system. It's a gravity syste Have turned the screws on the pump and nothing came out I even removed the whole screw but nothing... Now the boiler is overheating f5??? Any ideas?

It's either Eco max pro 18e or 23e

Is a combi one that heats water as you turn tap on if so then no as it has to heat tank up first.

Hi guys have had no hot water all day for some reason. We have a vaillant Eco pro max boiler now when you switch the heating on the boiler fires up but when u switch the hot water you get nothing?? Any ideas where to start looking?

Hey guys been looking at a 4yd skip but thinking maybe i will need a 6yd heres a pic of what I have so far and still have a lil bit more to dig.

Have put it on freecycle but no luck yet

Hi guys I'm currently digging up my lawn about 30sqm to lay down hardcore then lay slaps on, now my question is say I'm digging down about 75mm would anybody know how much roughly soil I will have to dispose off, as trying to get a rough price and what service to use, do I got for skip do I go...

Hi my dads dishwasher all works fine and washes fine but makes quite a loud noise throughout the cycle, any ideas where to start looking?

Just wanna say a big thank you for all your help. I changed the motor in the 3 port valve and now everything is working nice and hot radiators. :D

Any idea on how and where this is done? had a look from the top all I can see around the door seal is like a metal spring type band that seems to be very tight no way of making it tighter and underneath cannot see anything?

Any idea on how and where this is done? had a look from the top all I can see around the door seal is like a metal spring type band that seems to be very tight no way of making it tighter and underneath cannot see anything?

Hi Rocks its hard to tell but from underneath you have the plastic casing with the drum inside then in front of that just under the door you have a concrete plate and the water seems to be coming between the plate and the drum so im guessing its time for a new one shame when its not even 2 years...

Just had another look underneath and it looks like the water is coming somewhere from the drum any ideas?

Hi we put our washing machine on last night before we went to bed when I got up it was still going, but was make a funny noise and then I saw water all over the floor so turned it of by the looks of it the water is coming from underneath but cannot see any split pipes or anything, the machine is...

Right I just checked them all they are all reading about 245v so guessing I need a new mid position valve :(

Right have not checked the voltage yet as was leaving it running see if it switches off, well its been on almost 4 hours now and still pumping round but only works with the hot water switch on so will it still be the voltage or something else. Im getting closer its never stayed on this long :)

Connected it all up, switched the CH to on and nothing. Turned on the room stat nothing. Just put the HW on also and it is now firing up, Just wait to see now whether the CH turns off once the water is heated up.

at 200k ohms the 2 blacks give a reading of about 180, but when we connect to either black and the red there is no reading what-so-ever!

Right to do this im guessing I have to have the power on? Now just to make sure I set the meter right which one will be the highest?