Search results

If you mean the picture of the cylinder in this thread , its mine, if not apologies.

Before you start......practice

3.41 The installation of an unvented system is notifiable building work which must be notified to the BCB before work commences. The BCB may then check to make sure the work is safe and meets current energy efficiency requirements. 3.42 If the installer is registered with a competent person...

Cheers.

i fitted this into a smaller cupboard and the boiler as well! Sorry the pic is sideways but its a tall cylinder :)

Work

The pipe in Spain is black not blue.

There should be an o ring somewhere! Used these a lot in Spain and they can be temperamental never needed ptfe or as the Spanish call it Teflon.

cut an inspection chamber into the main drain and use one of the preformed connections on it and employ a proper plumber who should have allready told you this.

buy a proper shower waste it has a basket built into it that can be accessed from the top of the shower tray.

kw output of fire is irrellavant if it is flueless because there should be a rad in the same room, the fire is classed as a secondary heat source any gas engineer knows this.

with the s plan you should fit an auto by pass valve ....

trying to tell the op to do what you sugested and move the mag to the rtn pipe. you know it makes sense!

no it turns off the power on satisfid and pump overrun in boiler continues on a short timer and on a 3 port there is always 1 side open