Search results

Good luck. Wish you all the best . Whats wrong with plants , there better to work with. Theres no bullshit with plants you stick them in the ground, they either grow or die, They dont complain they take it on the chin.. I wish some of my customers would die. :P :P :P

Just ask in the plumbers shop for a shower suitable for combi boilers for £150 quid

Turn off the water and drain it down. Before you do anything else fit isolating valves , you can then turn the water on straight away

Your supposed to remove the linner. Theres no reason why it should fail the smoke test. The hole is still there

Have a gas tightness test done. See what the results are.

You would not smell it if you have a sealed boiler. The gas would go strait out the flue to the out side.

Since the pump is only 15 years old i cant see this as the problem. If you take the average T.V, car, washing machine, dishwasher, toaster, play station, and so on. Are these expected to last 15 years. You might consider powerflushing, or changining the rad valves

Browm pipe is used for underground because the soil is corrosive . Grey will not last long and will corrode

The pressure builds up in the main street. When you come home from work probaly the same time as about a million other people they all fill up the kettle use the toilet, and so on. So the pressure in the mains in the street is lower. However the pressure builds up at night time because...

This happens quite a lot. At night time every body goes to bed and stops using the water. The pressure builds up in the mains supply, so any weak joints or ball valves normally start dripping or fail completely. Sounds like the tap washer is on its way out . If you turn on other taps when it...

The boiler gas regulator may not be shutting off , so gas is still escaping from the boiler. Had one off these last week customer complaing about the gas bills going sky high. I went to change the meter, hade 10mbrs every ten second leaking out somewhere. Changed the the meter and the regulator...

Sounds to me like the workman dropped a whistle in the pip :P :P :P es

Just close the stop cock a little or change it

"Virtual" house So if you have a power cut the job disappears and all the customers :lol: :P

Iv had this problem before i no exactly what the problem is

I cant see why this stupid pratt of a pigeon would try to sqweeze into this little hole. Maybe a kestrel was after some dinner. or a cat

The only good pigeon is a dead one. :P :P

One stupid dumb pigeon.

Maybe the new tap washer is the wrong size or not fitted properly. :roll:

meant to say inlet pressure ok so pipe sizing os ok but poor dhw flow is due to mains reduced, scale in exchanger, blocked filters. thus gas rate affected but as long as its operating within min and max its ok ? Inlet pressure might be 20mbr but working pressure may not. You need to calculate...