Search results

A Ah ok. Depends on the brand re the fins but looks about right to me regarding the amount, but yes its seen better days. I would replace

That pan connector..... is not connected. Needs pushing into the soil so you cant see any rubber fins

Dont call an electrician. Get a plumber/gas man

Its not the rad. Its the rad tail it just unscrews out. If it is the extendable rad tail from screwfix i would def change it as it will only get worse.

Looks like an elbow to me. You wont be able to cut it flush

Looks like its an adjustable rad tail from screwfix. Them things leak if you just look at them. Suggest you change it

Also most boiler manufacturers state no plastic for the first meter on the flow and return pipework.

Or you could have unvented hot water. But heating system could be vented.

If you have a vented system then the tank/cistern is still required.

Just try it. What have you got to lose. Your suggesting no smell when the burner is lit so as soon as the burner is extinguished turn the gas off to the appliance. If you smell gas in 20 mins time then cant be the appliance

I would do as @Steelmasons suggested. Wait till boiler switches off after heating. Turn gas cock under boiler off. Return ten mins later when the smell has been appearing. If it still smells of gas then its not an appliance fault. The smell is coming from elsewhere.

I take it you are trying to remove the insert within the tap? Using a spanner? I use a short length of steel tube over my adjustable spanner as a lever to get more leverag. Then a short length of 28mm over the tap spout to hold the tap in place

Try a couple of levers.

Thats quality picasso better than the honeywell app.

There is a silver braided hose missing. Its prob behind the boxing.

Get a ceiling fed mixer like the aqualisa quartz. Much neater but quite expensive.

Has it ever worked? A thermal camera will help if your sure everything else is working.

Drain down the heating and the hot and cold. Or leave the heating on low so the temp doesnt drop too low.

Or slide the rad to the left. Just tap it with your hand it should slide on the bracket.

Look in the frequently asked questions section at the top of the page. Look up re pressurising the expansion vessel. Should have all you need on there.