Search results

So, 10 days and no further suggestions? I'm amazed - there must be a wealth of experience out there. For anyone not familiar with this thread my system is an Ideal Classic FF340 feeding hot water to a Boilermate 2000. The boiler flow output was below the boiler manual indication of 82 degrees -...

Old&Cold - no. Sometimes HW can get very hot (too hot for hands) but if the BM Store temp is low it won't anyway. And, all the pumps run. But why should that affect the temperature I see coming from the boiler?

I fitted a new control board to the Boilermate two weeks ago - a seperate fault - turned out not to be the board but the digital timer going ape, so now I have a spare PCB. I have used an infra-red temp guage on the Boilermate pipework (PHE and DHW sensor after painting black) and they agree...

Which part is most likely to be knackered? The estate I live on have all had Ideal Classics and Boilermates installed from new 14 years ago - I don't see loads of gas men visiting. All the people I have spoken to in the plumbing trade reckon these boilers will trundle on for about 30 years -...

I have trawled the web but cannot find an answer to this. I'm convinced the boiler (14 years old) isn't reaching the 82c which the manual says it should and would, therefore, like an opinion on where the problem is most likely to be. There's the control knob (potentiometer) on the front and a...

Still alive