Search results

Yeah sorry meant 15/60 :oops: The one I had problems with was fitted with non barrier hep and the corrosion in the system was so bad the flow was reduced to a trickle. If you've flushed the system it is likely the heat exchanger on the boiler is blocked hence causing the reduced flow...

I had all the above problems with an ultracom I fitted 2 yrs ago. It's all down to flow through the boiler. What pump is on there? I'd suggest at 16/60 Also what pipework have you got plastic or copper? If you have non barrier plastic then that will be the problem. Ted

The water stays hot as the cylinder is insulated to keep it that way. You can have a power shower (pumped shower on the wall) or have a pump (seperate unit supplying pumped supplies to any shower you fancy). Ted

They turned down the Magnaclean....... Ted

They come with a Grunfos pump now. Ted

Not a hard job to split the output on a combi. You are correct you need to have an indirect cylinder which will be heated by the combi. If it helps just think of the cylinder as an extra radiator that the combi will heat Ted

Good afternoon, Does anyone know of any companies in the Somerset area that would be able to mole me replacement water main? Also does anyone know rough cost I am looking at? Distance will be about 13m starting from the stop cock to the edge of the house. Cheers Ted

Quicker and hence cheaper to run both pipes to the one end of the rad. You should find when you take them out there should be a length of either flexible or rigid pipe running up the inside of the rad. Ted

The Mira Jump has left and right hand options and a variety of screw holes. Make sure you get one the same size (KW) as the one you are replacing or the wiring may need to be updates. Ted

I've put that bamboo flooring down in my bathroom and it looks great. Also did my lounge but find it dents VERY easily. It is coated Tony. Floor first everytime- you will never get a nice finish if you put the pan in first. Ted

You can have a GOLD medal from me when you do it using end feed next to curtains and carpets. Only joking. Nice for a beginner. Ted

I think you can replace it with a Dudley Turbo Flush which might be easier to get hold of. You just need to the other part aswell to make sure the syphon works. It just slides into the outlet of the Turbo Flush Ted