Search results

b4 continuing with this thread,you do have 2 seperate zones that can operate seperately via mot valves? and how do u get domestic hot water?

why isnt your installer telling you about them ? most rf stats have assignable channels .

tap directly into the cws tank

looks level to me ,if the brickwork is anything to go by.

all except the condensate!!!

yep.. we went to a job customer changed rad and the heating stoped working.

has nobody seen the type that enters the rad in the middle at the bottom,bizzare!!!

i was taught to manually open the safety valves to check they worked, boil the cylinder i don't think so,what happens if the valve is faulty 95 degrees is not to be taken lightly, in some ones house....

the water flow not temp ,but to me sounds like plate is blocked on the boiler side

just a quick point.. how is the perfomance at the kitchen sink is it ok and only poor at the bath or poor at all points ?

i got the manservant to post for me after he had cleaned and valeted the bently and waxed the lear jet whilst one was pony trotting in the bahamas with the landed gentry............another normal weekend

you and your dodgy boss are both heading for a meeting with the local judishury and a short unpaid holiday, GET TRAINED OR GET OUT....

if you dont know you shoudnt be doing it!!!!!!!!!!!!!!

are the trvs on the correct pipe, check which way the water is flowing,feel it getting warm and check the arrow on the valve.

i hope your not associating me with 3x2 leadbashing,i was taught properlike, at 20 1 could leadburn,glaze,weld to asme std,braze,oxy,fit bathrooms,heating,sprinkler systems and all maner or other jobs to a vgood standard .as i said a dying art the plumber......

i was doing it at 12 during 6 weeks hols with me dad he could dress lead slates from flat pieces (dying art)

on my assessment there was kitchen fitters with no plumbing qaulifications passing so they could install gas hobs, god help us all!!!

harry macs!, i used to work installing for them 20 or so years ago. heatline capriz landlords favorite,fitted a few had no probs ,to be fair installed and set up correctly should be fine ,but longevity who knows?

so even on 15mm it peforms ok as long as it has good mains pressure, this job has 2 bathrooms with mira mains fed showers.

hot and cold connections on boiler are 22mm