Search results

Better get a plumber or check the home insurance under botched diy

Steel watermain? Surley not

Why do you clean and flush annually?

The little brown coated man, was he a B&Q reject? Pushfit either speedfit or hep20 is fine on copper without inserts as the rigid pipe will not crush. Plastic pipe has to be supported by an insert and also the correct insert. Stainless steel for the grey hep20, white plastic with little rubber...

Instead of BG why not ask your friends family etc if they know a reliable, reccomendable local contractor? Could save you a small fortune on a BG price

If a push fit fitting leaked maybe its the plastic male end on the shower that is faulty

Are you sure it's a 2 pipe system? ++++++++++++++++++++++++++++++++ What type of system is it? open vent ,combi etc?

No you're wrong. scatmans point is taken. Ideal Icos control pcb £44 + vat Primary pcb £139+ vat I wish I had your mortgage. I dont work for Halstead I work for myself. Just going off a Friends experience with a Rayvenheat white star, The single board was replaced for £180 inc fitting...

Do you work for Vokera? Why have 3 seperate boards instead of 1? Scatmans point is taken I just wanted an explanation of the reset, thanks for that.

I'm not risking it

What is IMHO? I'm new on here. HMMM pcb for display/ reset,pcb ignition control, pcb circuit board all 3 boards cost between £89 -£122 each. Over engineered foreign crap. My Mums got an Ace high, Wish you could still get them. Seems to be as reliable as an accrington brick. Live and learn...

I have an easy way to find out. Put the board on ebay and see if the purchaser demands his money back!

I get where your coming from with that. What I also tried the first time the thing packed up was to completely remove the board and short with a piece of wire the live neutral and earth terminals with a piece of wire i.e. a dead board. I assume thats how they come when new. When it was...

LOL no! I'm not brave enough to cause it to lock out on that again. Unless you have a spare board handy. 2 boards is enough. Wonder if it could be anything to do with the ignition board on the gas valve. Better leave well alone i think

OK Thanks for that. I thought this boiler could be reset by turning the power off for 20-30 seconds. Not sure if it is a resetting board or just powers the pcb down when switched to "off". If the display pcb was faulty why does it work on a new main pcb? The switch is intact (checked when i...

Actually it stays flashing at 01. Just replaced the board and its up and running. Thanks to all for your help.

Lo and behold the experts vanish ...night night fellas get your sleeping hats on and scratch your heads.

OK thanks for the cure but what is going to happen if the gas has to be turned off again? Which circuit board needs replacing the knob/ display or/and the main pcb? What will happen if a different lockout occurs? Starting to wish I'd had a halstead ace installed instead of this cheaper one

Goes blank as though it is "off" Then looks promising until "01" appears.

Its a dead stick... Nothing.