Search results

Any other pumps that can do the job..? Head really hurting now. :)

Sorry DP, posted my last reply out of sync. I hear what you are saying, and I'm going round and round in circles, talking to three different manufactures along with the pump people too. Only hard facts I have managed to obtain is flow rate of incoming main rated to pump out flow rate.. At best...

Only a few bottles of wine, slowly diminishing of late.. I'm happy to go with the one myself, customer will go with my recommendation,

On talking to the cylinder people, 3/4 prv will discharge 28l/m, the pumps can handle 32l/m, as there are 3x cylinders the chances of more than one prv discharging at the same time is unlikely, will one pump do the job..? Answers on a postcard.. :) Cheers, db.

Hi Guys, Anyone know the l/m of a 6 bar 3/4 prv..? Thanks, db.

None, there is a sink in another part of the basement and that is on it's own sump pump, bigger than the ones they installed for the cylinders as it happens..

Hi, It was a family house many years ago, it's been a retirement home in the past too, it's now being returned to a family house once again. 4x permanent at the moment but they have lots of people visit, staying over etc.. Not at the moment though..Obviously.. :) Heating system has 55x rads to...

Hi Guys, A house I am working on has 3x 300l unvented cylinders in a basement. There are 3x Pump House PPH-3-8L-HW pumps installed taking all three cylinders along with the central heating discharge prv. These pumps are not correct for this installation so plan to install 1 or 2 Pump House...

One 3ph 7.5hp compressor bought, 30cfm. A Happy bunny here. Thanks for all your advice guys, you have been a big help. Cheers, db.

D'oh! Of course.. :)

Pushing my luck now.... My mate says "couldn't you use an inverter?" Set on buying a 7.5hp 3phase compressor, could it be run of an inverter..? saves running a new sub main to my garage... Thanks, db.

60amp single phase..? Not to sure though..

24cfm sand blast cabinet would be the most air required. Am I right on the single phase 8hp requiring 45amp? If so this would mean running a larger swa, from the meter as our consumer unit is upstairs, meter is outside and closer to the garage, 45amp sounds a big draw as we have a 30amp Aga...

Now..! Don't shout at me but....... :) I can get the required CFM from a single phase compressor, as there is one that runs 2x 4hp motors, I was looking at using a 7.5ph 3ph compressor as we have 3ph. Would the running costs be that different as one is on single phase the other 3ph? I...

It took Igloo four months or more to change the faulty meter..!!

Hi, we have 3ph coming in, only 2ph are being used at the moment. We are EDF too.. ???

Hi All, As this may be of use to somebody else the outcome is £75.00 connection charge to pre installed isolator next to meter box, standing charge / taffies stay the same. Thanks to all.. db

Thanks for all the help guys, have a plan now..

Hi John, Thanks for your advice, we have a 3ph meter in place already, only using x2 of the phases. So I guess it's install cable to garage with isolator each end then get the supply company to hook it up..? I have an electrician popping round Saturday to have a gander.. Will there be a...

We are on the following tariff. Electricity Unit Rate (inc. VAT) 13.013p/KWh Electricity Standing Charge (inc. VAT) 20.833p/day If it is just the case of having an electrician run a swa to my garage isolated each end, that's is ok for me, is he allowed to check the fuses and run the tails into...