Search results

  1. 9

    Adding corrosion inhibitor to a heating system

    Thanks. As it's a sealed system, there's no obvious drain point in the circuit (that I can find anyway). What would you recommend would be the best way to drain the system? It's all on one floor. Cheers
  2. 9

    Adding corrosion inhibitor to a heating system

    Hi, I'm planning on replacing a radiator in a flat - which has a sealed combi-boiler system. Also, moving the rad along the wall at the same time. My thought is to put the new rad in place and pipe up to the old pipes - then freeze them and attach the new pipes. However, being a sealed...
  3. 9

    Positioning radiator in cold bedroom

    Thanks for the info - I'll look for the highest btu unit that'll fit under the window.
  4. 9

    Positioning radiator in cold bedroom

    Hi, We're replacing a radiator in a cold bedroom. The old one is on the chimney breast. There are two external walls - one with a window. The plaster's recommended putting a wide, short rad under the window but I always though rads under windows just pumped heat outside? So does the rad...
  5. 9

    stripping paint from upvc window frame

    Hi, Preparing a window for painting and noticed that the upvc frame has been painted too. Half of it is straping off really easily but the rest isn't. I don't really want to scrape it really hard as it will damage the surface and I don't want to paint it again (unless necessary). Any thoughts...
  6. 9

    Stripping artex, asbetos and decent plasterers

    Hi, Went with plastering in the end - got a good job too. Suspected the artex was 70s or early 80s so a good risk of asbestos. Thanks all
  7. 9

    How long to wait to paint new plaster?

    Some more details - all walls have been hardwalled, PVAed and skimmed (on top of the Artex). In total, I would say about a quater of an inch deep. The fella said it would be OK to paint in about a week but from what I've read that seems very soon.
  8. 9

    Artex removal from Ceiling

    Also, old Artex could well contain asbestos (up to and including the 80s) so skimming is the best idea to be safe.
  9. 9

    How long to wait to paint new plaster?

    Hi, We're having 3 of our bedroom walls skimmed to cover artex. The pattern isn't too deep. However, on one wall, it's blown so that's getting redone totally. That wall and one of the others are outside brick walls. The other two are internal: One is brick, the other partition. Once...
  10. 9

    wireless

    Sorry - that should have read 'configured to block web access' - just to be pedantic.
  11. 9

    wireless

    Hi, Just to confirm, if when you typed "ping google.com" on the black screen you got a response including IP address like: [code:1] Pinging google.com [64.233.167.99] with 32 bytes of data: Reply from 64.233.167.99: bytes=32 time=93ms TTL=239 Reply from 64.233.167.99: bytes=32...
  12. 9

    Stripping artex, asbetos and decent plasterers

    Thanks - decided to have a few more quotes - so far one's come in at £300, and getting a few more tomorrow. Think someone was trying to take us for a ride with the first quote. Cheers
  13. 9

    Stripping artex, asbetos and decent plasterers

    Hi, I'm looking to get rid of artex finished walls in the bedroom and been looking into it. The ceiling is fine. Replastering is one option - but money's tight at the mo and we've been quoted over £1000 for the 3.5m x 4m bedroom which seems a lot. Been looking at stripping options -...
Back
Top