Search results

Hi Our boiler has low pressure. Am trying to increase the pressure but cannot work out how to release the valve on the filling loop as there is no handle. Hopefully a picture is attached. I presume I need a tool? Thanks for any advice.

Thanks John, I will try that in the morning....

The drum pulley doesn't have grooves. The washing machine is located in the garage where the light isn't that good so I could take a pic in daylight tomorrow. I have been doing a bit more research in the last hour and have a horrible feeling it could be the bearings... Will try and take...

Hi John It is a multi grooved belt. The motor is wider than the belt so I placed the belt in the middle. Perhaps I gave aligned it incorrectly? Thanks Rachel

Hi, Belt broke on my hotpoint acquarius washing machine and I have replaced it this evening. However, when I turn the drum, the belt moves on the drum pulley towards the drum. It shifts so much that the drum then won't move. Any ideas? Thanks in advance Rachel

Have put the programmer onto constant but nothing seems to happen. Again, I can hear a click in the programmer on the boiler when I turn it to constant, but the boiler doesn't turn on. I am not sure about the zone valve. Thanks for your time in helping me try and sort out the problem...

It is a glowworm energy saver boiler and doesn't have a button that allows me just to choose hot water or central heating (my old boiler had this). The thermostat on the boiler is set to a high temperature. The electronic timer attached to the boiler is set to come on at 0600 and basically...

Hi, yes the flame symbol is appearing Thanks for any advice

Hi, I would just like some advice before I might have to call out a company. I have recently moved house. The house has a Horstmann DRT2 thermostat. The thermostat has power (I have put new batteries in). When the thermostat gets to the temperature that the heating should come on, I...

Thanks for the responses. It is a Baxi Solo boiler. I will try and get a photo uploaded. The engineer has commissioned and registered it, so I assume I am safeguarded should there be any problems in the future? You are right about highlighting too much, this is my general problem in life...

Hi, I just wanted some reassurance really. I have recently had a conventional condensing boiler fitted. The engineer, who is Gas Safe registered, used the same position for the flue as the previous boiler. I live in a terraced house and the position of the flue is approx 300mm above my...