Search results

I’ll post a wider shot later tonight when back from work :) Cheers everyone

The ones above, yes, it’s like a series of decorative square panels just under the 1st floor window, that slightly sit forward than the rest of the brickwork

Yes, still standing for now….

Hi All, Looking for advice on if I need to panic or not. Totally accept I’ll need to get someone in to look at this rather than internet strangers, but would appreciate thoughts from the expert community. House is old c1900s, not noticed before, but just below the 1st floor window, looks like...

Sorry its taken so long to reply, had some other domestic stuff that had to take priority, and flicking the manual switch wasnt too much of a problem, but now is the time to fix! Have removed the old one, and it says HPA2 on the cover, haven't removed the wires yet so dont know if its 4 or 5 -...

This one? https://store.danfoss.com/gb/en_GB/Heating-and-District-Energy/Motorised-Zone-Valves/2-Port-Motorised-Valves/Valve-Actuators-2-Way/Type%3A-HPA/p/087N6580?language=tr Thanks for the help by the way, really appreciate it!

Lol, just had a look - might be easier than I think! There is a good two inch clearance at the top! Guessing as it’s just a 2 port, it’s the two wire version I would need?

Cheers, thank you. I think it is the actuator thingy. Might have to get someone out, I could replace the head easy, as it’s one of the danfoss HPA2 and they are fairly cheap and easy, the problem might be, that the three we have, have been installed in such a way, as I don’t think there is...

Hello Experts! I have a Danfoss FP975, controlling Hot Water, and Central Heating. Was working fine until yesterday, and this morning woke up to no hot water. So, after some messing around, this is what i have unearthed. The Hot Water buttons dont power up the boiler, the programmer unit...

Yes, but it’s behind the sofa, want to make switching on/off closer to the lamp

Again - thank you to everyone who has helped me keep my metal twig lights, really appreciate it. I’ll get the transformer as suggested, and will connect the two wires through an in-line switch, always wanted a switch on them, so it makes sense to take this opportunity. Just to be 100%, I don’t...

One more question (ok its probably more like two....) If I wanted to avoid soldering a new end onto the light cable, could I just join the two using an inline switch instead? So I would have the new transformer into one side of the switch, and the light cable into the other? Ok, now onto the...

Thanks - really appreciate the help

Cheers, thank you. I’m assuming I can just cut the ends off both, and use a switch connector block to join them together as the din plug is on the end of the light cable, and the slots are on the transformer Guessing the difference between 25.2va and 30va doesn’t matter?

Thanks :) It uses teeny tiny bulbs (technical term!) guessing no led replacements for them yet, so they are incandescent bulbs. Or is it a “you’ll burn down your house, buy something else” time

I have a really nice set of Twig Lights, bought a long time ago, proper metal ones, not the new brand of plastic ones, really dont want to throw them out.... When moving them around, I dropped the transformer, which now rattles, so I don’t want to use it. Is there anyway to replace this...