Search results

Long tube light but also think lamp is doing it too they got energy type bulbs in I changed plug socket to see if that changed anything but no .

Few months ago not every time but sometimes when I turned off kitchen light it set off the panic button on alarm system . So I disconnected panic button but now when I turn on or off light the cctv monitor goes black then comes back on anyone got any ideas thanks

Did u sort it ?

Did it get rid of line fault ?

Found this can't remember doing this myself go into 51 then 17 then 1 restart panel

After you got to last fault try puttin code in and ent again

Either ent or esc should go back to normal banner date / time etc

When it says user reset put in code then enter then use arrow key to go though faults think it's ent again .it will list all faults what av been triggered

Not sure that's how mine set up it cleared all line faults after an alarm though I do have to put code in and scroll through all faults to reset

User reset is your code When u disabled line does it now look like this

If it is go into engineer mode at set zone 1 as spare see if sets after that

Is pir cover on proper

Just wire up and if any other zones show up u will put in panel

The pir is right just for an example u r only using this one pir put the blue and yellow into zone 1 remove all other zones just wire that one and go from there

No green on its own White and yellow together Green on its own

You will need put resistors in all other zones as well or they will show as tamper too

So if your first green and white is zone 1 Yellow and green is 2 White and yellow is 3 Leave green as it is White and yellow twist together And then green on its own That is zone 1 and 2 in the first 3 screws Then white in next Yellow twisted with a resistor next Then resistor on its own

Ok so you will need eol in pirs but your zones are wired wrong

If this makes any sense

You can set zones as not used so if u r only going to be using 4 you can set all others as spare but you will av to put resistors in pirs and door contacts