Search results

I tend to use screedmaster 2 latex based level, 3mm is quite a lot per 1m2 unless a good quality underlay is being used, go for a 6mm Poly Ethylene underlay which can absorb (sp) 1 to 1.5mm of undulation. Ensure you use a D3PVA glue also when laying the floor even if it is a click system...

Providing there is no underfloor heating involved go for cloud 9 from ball and young very comfortable underfoot.

You are in a grey area here as it depends on the circuit and the lighting involved. Most lighting circuits use 1.5mm cable that is capable of taking 19 amps not calculating voltage drop. I essence they should not heat up unless there is a fault in the circuit or you are overloading the...

Your being polite :lol: no offence but the linear range is suitable for rabbit hutches and making pallets, sorry, :twisted: Go for a 15mm at least it lasts longer and you just know you have the quality, I would not ask any flooring fitter to fit 7mm engineered board and I have a job...

If you want spped go stainless steel but be prepared to pay, the benefit is it will bend easily but because of the grade needed it is more expensive but less joints so can weigh out the same. stainless requires a crimp tool and all connections are flat face. As for plastic good luck...

Range tribune or Ultrasteel HT both from the kingspan group of companies now as KS have been buying a lot over the last 2 years. I have never liked the all in 1 version of cylinders as once the membrain breaks it is expensive, go for seperates all the time as it is cheaper to change an...

A bit of a silly question, is this cylinder ceramic lined and does it have an anode which needs replacing ? muddy water to me sounds like the anode has been eaten away at and now contaminating the water, usually only on cheap cylinders though that are not usually manufactured in this country...

in hell