Search results

not sure what fully pumped would be? The pump itself is about 6 feet from the boiler and under the floor on the ground floor. The feeder tank is in the loft with 6 radiators on the ground floor and 4 new ones to replace the old single one on the first floor (attic is above this as in a...

the pipes only get slightly warm on both sides - its hard to tell - , and I mean slightly as the boiler isnt on long enough to heat them any further. I thought I'd post some picks of the system to help. At leas I hope so. I still can't find the bleed valve on the cylinder tho. Check out the...

also tried to turn the pump up to the max with no luck. I cant see because of the angle but I assume the three settings are speed settings? its on the max now and I can feel the pump vibrating a little. Almost like a little hum.

Thanks for getting back. Just tried to bleed it again with the same result. Off to check the cylinder again now.

Right. The pump is working so no luck so far. I have however noticed a "Port Zone Valve" (I think - http://www.heatandplumb.com/acatalog/Honeywell_22mm_Port_Zone_Valve.html?utm_source=ProductSearch&utm_medium=GoogleBase&utm_campaign=Feed1) so I'm now thinking I need to drain the system...

still researching. Looks like someone has had the same problem as me. http://uk.answers.yahoo.com/question/index?qid=20071009034410AABm2qG I'm off the check the pump ain to see if its running. http://www.diynot.com/wiki/plumbing:faq:faq19

ok tried to bleed the pump and all look sok. Took the skrew out the middle and a little water came out. Put the boiler back on and it ran ok for about 2 min befor sutting off. Again I could hear noises from the boiler that sound like water gurgling. Getting very cold now. I was also...

So should following the instructions here... http://www.diynot.com/wiki/plumbing:faq:faq9 and i should be ok? Thanks for getting back. I'll try that tonight and see how it goes :)

Hi All, Looking for some help. I have an old stelrad Ideal e-type boiler (30 years) and all was working fine. I then decided to add 4 radiators to the system. Drained the system, added the radiators, filled the system again after unblocking the expansion tank (think this was an air lock) but...