Search results

So I have to wait 1 or 2 years to lay lawn?, What do I do in mean time with bog for garden?.

No I dug the hole and filled it with water to see how fast it would drain, spoiler there is still water in the hole 9 hours later but it has gone down.

Ok have removed over 2 tons of loose stones, that was very hard graft, don't know what i'm going to do with said stones but have put advert on freecycle, anyway I have noticed that one of the previous owners has dug like a v shaped trench and filled that with these stones im guessing for...

Would the stones not he good for drainage though, I know the neighbours have both had problems with flooding on there lawns.

So I am contemplating a new lawn instead of the loose stone that is there. Currently it has like I said loose stone over a membrane and then obviously soil, which is more than likely clay soil. I have been thinking about how to do it and my idea is to remove stone temporarily, take of membrane...

Just came to tell everyone who helped I have now sorted this many thanks, I took of the old standalone pir and got new junction box, and have simply cut the 2 redundant wires, all working though I'm not 100% sure about how we fed the cable into new junction box, instead of the old screw glands...

Good news is my fan/light works in conservatory, so next step is just disconnecting the 2 wires going to the pir, and then hooking up the other 3 wires to the floodlight thanks for your help

Yes the fan was working before all this, I have taken fuses out of both sockets, am I not right in that if I disconnect the yellow and black from the pir and the floodlight and just connect live, neutral, ground it should work?.

Anymore suggestions on what to do here, should I just get another junction box, get rid of standalone pir and connect straight to floodlight and put tape around the wires that is don't need?.

Yes it does.

Could I just leave the connections in the pir as is, and just connect live, ground, neutral to floodlight and tape the other 2, would this work.

Just the one cable from pir to floodlight, how do I connect it up, can I bypass the pir and just use the 3 inputs that go into pir and then just 3 into floodlight, at this stage I don't know what to do.

Another picture which might help

Think my solution is to get rid of existing pir, get junction box then I just have 3 wires in 3 wires out.

More photos managed to get top off pir, there was a for a fact 3 wires coming from the conservatory into the pir, and then 4 wires going to flood light.

Again don't know what you mean when you say we're is it terminated.

3rd and 4th pic are inside of passive, also what's a dmm, please speak like you were speaking to a child lol.

Ok here's some photos took floodlight off and partly took cover off standalone which the inside is covered with dead spiders and cobwebs, also noticed one of the wires from floodlight looks loose and one of the wires from outside cable is just bare wire anyway £10.00 to anyone that can sort this...

Do you mean because of the vent activating the sensor?.

I will unscrew it tommorow and take pictures of cable and back of floodlight thanks for your help.