Search results

Thanks, I am thinking of putting in a chemical and see if i can shift what ever it is if anything. I will put the stuff in and then drain after a couple of days but drain from the new rads, I think that way i can see how quickly it drains. As I had said next doors has the same set up and no...

All the pipe is 10mm copper i joined on in 10mm plastic with a push fit "tee"

but not as we know it

If air is the problem do i bleed from top? if slude put an chemical in What if its a blocked cold feed?

Advice please on fitting some refurbishment 450mm cavity trays Is there anything i should look out for, i have looked on web sites but there are no subtitutes for past experiences or advic Thanks ps this forum is the doggies doofers

As an up date I have turned all the rads off except the 2 new ones to force pressure through them - they remained luke warm. I then put hose pipe on to drain some water off and the water started to come out warm. closed the drain then opened all the rads - the hottest i closed the lv a...

nearly all of them, i have had to close the lsv to get hot to rads in conserrvatory

Lock shield Valve (LSV)fitted to left hand side

HELP its doing my ed in i added 2 rads in my conservatory. I drained down the system so i could add an inibitor when filling. I added the Rads and everything was fine I switched the water back on and added the inibitor after an hour or so after the air was out i opened the LSV and continued...

thanks for the interest- the water dosent come out of all the weeps onl 1 of them and its the outside wall of the house on the inside of the conservatory. this is the 1st time in 8 years its done it

do i have to take bricks out as on internet or what

Thank you - we all live and learn

thank you

Get another its sounds knackerd

try turning valves off on ones that are working this should "purge" them clear

what the builders did on the re-point is sound but where i put the flashing its powder -i have wire brushed it all out and applied abuilders mastic still -issing is through weeps and wall looks wet!!!!!!!

Brilliant but dont get the "oxymoron" bit

I have done this on many occasion- get a white upvc section if the gaps 50mm then buy a 65mm skirting section (specialist building factors sbf.co.uk) apply silcon and fasten in place the radius on the section on side to bath - square to wall. looks good and i have had no complaints but make...

Help. I have a conservatory and water is pouring in through the weeps that the builders put in - the house is 8 years old and have had 1 or 2 probs with mortar on bricks - the builder has ground out 30mm-40mm and repointed. This was 12 months ago and now water comes through weeps. also what...

That is personal preference but the one i am fitting is sound, thanks for your reply