Search results

Thanks for the reply :) The present system has been in 10 years and i moved here 3 years ago so it not doing to bad until recently At present i'm adjusting the Boiler temp to give me the 55 ~ 60 degrees i want at the furthest hot tap My next step is to fit a 3 way valve and temp sensor...

No motorised valves fitted yet !! :wink: It is just a basic Water / Radiator with just a all on or off option and controls on the radiators via there local Thermostatic valves From the info i have been given you recommend the valve from the pump to the storage tank be fully open I Was...

Dear all Re piped as version 2 diagram above and so far (4 hours) so good :D BUT :?: If you look at the diagram above you can see 1 isolation valve between the pump and the storage tank If i'm correct it should be closed Look forward to your excellent support

Guys Sounds good to me If i'm hearing you loud and clear i have modified the drawing for your approval Should i change the cold feed pipe from 15mm to 22mm when it is re-plumbed or leave as is Look forward to your reply Very grateful

Dude Could do with a little more info Link the cold feed ? from to ?? Open Vent, If i'm barking up the right tree it is open vented and was working well when the pump failed, i had one hot header tank Looking forward to what i can only describe as the fastest forumn i have ever seen

Dear all Recently had boiler serviced by BG due to pilot light failing then pump failure and being replaced, All is up and running for now He recommended that it needed a Power flush after he looked at the pump and wait for it... £550 should do the job !!! :shock: When he saw the look...