Search results

I think you will find they are called set pins.

Great sparks ain't made.............we are created.

Had a look at the photo, and I didn't think 2BA. Either way your new fittings are NOT going to centre up on a 50 year old conduit box. I have spend 30 years fitting new lights onto 2BA / 2 plate conduit wiring systems in schools etc , and you ALWAYS end up drilling the fitting out to fit...

Two ways to do it, 1. Use a Stanley knife, doesn't matter how deep you cut, as you then pull the cores apart by hand a further 4 - 6 " and cut off and throw away the part you scored the copper on. 2. Sidecutters, straight down between the cores, but then still, pull it apart by hand and...

Please don't stick tinfoil to a flourescent tube. Please. Fit a proper diffuser to the fitting if it's too bright, however I have to say that the whole point of flourescent lighting is that it gives lots of light! Consider changing to a tungsten or LED fitting instead, but please don't...

Keep it simple, leave it as 30 / 32a Rings in 2.5mm T&E. Changing to 4mm / 6mm radials won't gain you anything with domestic loading, it will just cost a fortune and be a nightmare to connect up, if you want to start chopping in 44mm deep backboxes to get the correct bend radii on 4mm or...