Search results

It will ruin the pointing and brickwork, eventually will probably get into the roof

If I understand you correctly, the difference between the roof angle and tile is because the tile bottom is resting on top of the tile below it,

Do not use , the seal is in poor condition and could leak poc into room

Total safe disconnections

Many boiler manufacturers state the use of non switched socket

Yes, was he really a plumber?

Don't use anything to permanent, Looks like the valve could leak due to being badly fitted

Lamb's tongue or ovolo

Little knowledge, sounds dangerous

The bricks in the doorway are laid flat, the arch bricks are upright

Very much doubt those bricks in the doorway are the arch bricks

Combi boilers have a expansion vessel fitted inside, sometimes on a large system a additional one is fitted externally, why he replaced this you will have to ask him. He could use a analyser before servicing to get a indication of the condition of the boiler. A strip down service and checking of...

It could be the boiler just needs a proper service, what make and model

What boiler, and how old ? Did he do a full strip down service or just used a flue gas analysiser

To be honest the brickwork above the opening is really bad, I would want it taken down and rebuilt properly

Hot and cold supplies wrong way?

Good luck to Mrs mottie, hope she enjoys her retirement,

Have them do all the work properly, that is what they are being paid for. Other people have told you it's all very poor .

Hard to tell from photos , my thoughts are flaunching looks to be weak soft sand/ same for corbelled brickwork on parapet/ crap filling in general. Valley tiles look too close, Lead under apex/ bargeboards is too long and pointing of lead looks insufficient. Cannot see any bespoked lead. Really...

A