Search results

Well a result! First I disconnected the diaphragm unit and carefully checked that there was water going to one side, there was. That confirmed the pump manifold body was OK. Next I took the diaphragm unit completely out of the boiler and undid the screws to have a look at the diaphragm. All...

Hi Tony, Hopefully a picture of the connections is attached to this post. This will prove to you that it is plumbed correctly! I totally understand your frustration, but I did what you said in a different way which I thought I had explained. Rather than dismantle the diaphragm end of the...

Hi Tony I am certain that it is plumbed in correctly, 1) because I've double checked with the installation manual and the pictures and 2) where the cold feed comes in the pump valve block, there are two small pipes taking the incoming cold feed pressure to the diaphragm body you referred to...

Hi Agile First off nice R4, Charente registered? I'm in 24 but right on the border of 19 and 87, you'll know where I am referring to! Now to the boiler. Biasi 28S combi and yes it has three knobs! Bought from Screwfix, driven to France by me so definitely no recourse from Biasi, and I wouldn't...

Strange as it may seem this is a brand new combi! I purchased it ages ago (2002) for my retirement project in France and FINALLY I have got as far as installing the boiler! It has stayed in a dry place in its box since then! Suffice to say my project got waylaid by the pleasant French way of...