Search results

Ok final update: I got the r6660d identical receiver for £20 and just removed the front plate with the circuit rather than the whole unit and replaced the facial with the new one and everything is working fine after pairing up. Thanks to all for their input .

D hailsham, you may well be correct as most sellers on ebay do say it IS compatible, however seeing as the seller had not got round to despatching it yet, I managed to get him to cancel the order as I had also purchased the Original R6660D receiver at the same price of £20 on ebay too, so that...

Well, here's a response from Honeywell..seems like il have to return the bdr91 as according to them its NOT compatible, its a good job I ordered the cm61 model shortly after too otherwise would have been more time wasted.... Dear Mr. Xxxx Than you for your patience. Further to the escalation...

Thanks a lot, will pick one up then this week and once I have got it I will update again shortly. Honeywell prob get back this week so won't wait on for them .

Sorry for late reply, just an update: I did what you said and the boiler fired up and heating started working. This now confirms the receiver is faulty thanks. The only thing was the burner light remained flashing even when the burner was not fired up. After checking on forum I found out that...

Ok will do tomorrow. Thanks again.

Ok thanks I will.do this tomorrow and report back. Thanks for your patience with me and good evening. Am I putting wire in A and taking it over to B ?

Thanks Echo, but there is no wire in C. The wires are in A and B. Please see the image. A has a black looped wire coming from the second L and B has white wire in it. Are you still correct in that I need to add another loop from B to C or will it be from A to B ?

The bdr91 receiver on eBay sells for £20 and says it's compatible with cm61ng model so I'm.guessing it would be ok. Also is there nothing possible to eliminate if receiver is faulty or not ? Are you informed on whether the wiring in the receiver can be over ridden to make the boiler work...

Is it possible to keep the stat and purchase the bdr91 receiver seeing as that is what it was replaced with ? Will I be able to pair it up with the new receiver ?

I have tried the grey button and the green led light comes on for split second and switches off, its the same whether I do this from the stat or the receiver itself

Thankyou for explaining that. Is there a way of for sure its the receiver that's faulty. Everything does seem to point to it. If it turns out faulty for sure, then am I right in saying these have been replaced by the bdr91 model ? ie: can it be wired without the wireless by using a loop...

Sorry to sound stupid. What do you mean by target and actual temps ? Current temp on stat is reading 23.5c. If I up it to let's say 25 , then the little wireless signal shows on the display, which in turn trigger the green led on the receiver upstairs but only for split second, regardless of...

Good evening I have just joined today to hopefully get some help and be able to fix my problem with your expertise. I will provide as much info as possible to avoid confusion. I have a ideal Isar he24 boiler and this has a wireless thermostat dowstairs (cm61ng) , the receiver is r6660d I...