Search results

Remove power, reconnect power

If the same PIR that has been moved from the kitchen to the lounge is causing the fault, and the battery os good then you will likely need to replace it. If the pir that was moved from the lounge to the kicthen is causing it then you will need to look at relocating it away from possible causes...

Ive only used the veracity highwires, u will need 1 per cable and they are not the cheapest lol. Haydon worth a try at 20 quid

https://www.google.com/search?ie=UTF-8&client=ms-android-samsung-rvo1&source=android-browser&q=ip+over+coax

There is a seperate volume control for app setting. Set to 0 for silent

Aye they are ****e for that. Not had any issues with the nanos..... yet

Could be a new door....

Its a bit bigger though. Can also use the mcnano-we

Yes

All of them

Make sure input area is set to 'any' for all zones, level set on, and b exit to timed

Take the id biscuits out and fit EOL resistors 2k2/4k7 and obviously wire each detecetor to its own input on the e76 panel

Check the wiring u may be lucky and each detector may be wired back individually to the panel. If not easiest option guna be to use what wiring you can and replace rest with wireless

I would say that that is the control panel with an onboard keypad

Or reboot the router/booster

Yes any 0v will do

0v to C, NO to eng hold off, Change outputs > endstation outputs > pgm op > engineer access (think its number 59)

Just twist the blue and yellow at the kitchen pir and wire the hall with the blue and yellow i reckon that will work. Wrt the bell does it have the tamper switch with the circle base that goes at top left or is it the old style to the bottom left of the pcb ?

I think i worded that wrong lol, with them joined together in the kitchen do u get continuity on the cable from the panel to the hall? U can actually wire each detector with 3 cores if u link 0v and com in the detector, then wire the other core to eol terminal on the panel