Search results

Yes.

Yeah same resistors. The Ricochet module you have is for commuting Ricochet devices into other brands of alarm panels. If it’s not too late I would swap this for an 8XP-W as you would get better diagnostics through the alarm panel of the wireless devices. If you are going to keep it, wire each...

Your beams can be EOL, wire them into the expander and use the two outer terminals of the zone connections on the expander. What’s this relay module? Part number? I think you may have the universial reciver which allows ricochet on other non Texecom panels. If so this is wrong you’d be better...

If you remove the filter then it becomes a standard detector not pet immune.

Were your old ones pet immune? And did they work? The pet immune ones basically ignore things below a cirtain hight along with heat mass therefore if your move the sensor higher then the pet free area rises too, which means a person could walk under its range without triggering it. I’ve been...

Make sure you’ve fitted them at the specified height and also try setting the jumper link to “Hi”. Also leave the rooms clear of movement for 5mins before testing to overcome the sleep timer.

Correct

Yeah you need to fit the resistors unless the PIRs your using have them built in in which case select 4k7 2k2 if not wire as follows: 4k7 across the Alarm NC terminals 2k2 from NC terminal to Tamper. Wire 1 into NC with the 4k7 leg. Wire 2 into unused Tamper Terminal. Meter readings should...

It’ll be fine, you could run two DTs off the back of the keypad. If in doubt there’s no harm in doubling up cores on the feed power to the keypad.

Flog it on eBay... then do the same with the SmartCom. ComWifi works with the original Texecom app or Engineer app only. SmartCom works with previous apps and the new Connect app.

ComWifi is not that good and tottaly different. flash your panel to V4 and get a SmartCom to use the connect platform, much better app interface and more reliable notifications. V4 gets the app code from the connect server via the SmartCom, the ComWifi will not generate an app code nor will it...

Ok and what do you have in place as a failsafe when there’s a powercut and your router is down or the app is discontinued or unsupported? I can see what you have in mind but I think your be better off with a proper control panel and hardwired keypad as mentioned previously, these have...

How about the keypad? To arm/disarm?

I don’t think it’s gonna be as easy as your expecting. You’d be better off upgrading the Sterling panel for entirely new panel and reconnect all the wiring from the existing circuits. The latest panels are app compatable. Search Pyronix or Texecom Connect these are the two leading brands, in...

As above, DT is perfect for a garage.

I think your right, I edited the schedule last night for event only, it’s still not quite right but will have another play later.

Similar, it’s more like draw a box...

Ideally I could do with her number...:love:

The NVR has two seperate features, I was previously using motion detection by selecting pixels within a grid. I now want to use a different feature, that being intrusion detection within a predefined space. I have this working and get notifications, it’s just the recording I need to get working...

Anyone know how to get my Hikvision NVR to record on intrusion detection only? I have set up the field and get notifications correctly, it’s just not recording. The unit records on motion detection but we was getting too many false alarms.