Search results

  1. C

    Revitalise Shower Problem

    The problem with the MI is that there is no real info in it. The statement that i posted about the Heater is taken directly from the manual.I will go and get the pump you sugested and give it a go.As far as I am concerned the only thing it could be is the fact that the hot water has not got the...
  2. C

    Revitalise Shower Problem

    Think I get the point,but still not sure if I need a hot water pump or a hot and cold water pump.
  3. C

    Revitalise Shower Problem

    THANKS PETE I NOW KNOW THAT MI MEANS MANUFACTURER INSTRUCTIONS. THE MANUAL SAYS THAT WHEN THE WATER FLOW IS AT MAXIMUM THE WATER PRESSURE SHOULD NOT BE LESS THAN 1.0 BAR TO KEEP THE HEATER FUCTIONING NORMALLY IDEAL WATER PRESSURE IS BETWEEN 1.0 AND 5.0 BAR.THE FEED COMES FROM A HOT WATER CYLIDER...
  4. C

    Revitalise Shower Problem

    Pete what type of pump would you recommend to hit the maxium pressure.thanks Cavanagh.
  5. C

    Revitalise Shower Problem

    THANKS FOR THE REPLY.NOT SURE WHAT YOU MEAN BY THE mi CONCERNING THE TEMP CONTROL.THE UNIT IS A MIXER ONE, HOT AND COLD FEED TO THE SHOWER TRAY,FROM THE TRAY YOU JUST connect UP TO THE BOTTOM OF THE PANNEL SHOWER AND IN THEORY, SO THE BLOKE IN B&Q RECONS IT SHOULD WORK.AS YOU PROBABLY HAVE...
  6. C

    Revitalise Shower Problem

    I have had a revitalise power shower fitted but get no hot water out of it.Checked hot water at the conection point to the shower unit and its red hot.When water comes out of shower head its lost its temp. Do I need to fit a pump to the hot water supply. The sink next to the shower water supply...
Back
Top