Search results

cant really say with out seeing it, but prob would be fine. But theres always the exception. casing seals could be torn/missing under the white cover which you could not see. put your co detector beside your boiler for the sake of fifty sixty quid get it checked over. but as you say...

its not being used as a bypass there is already a bypass fitted to system. there should not be a trv fitted in the same room as the room stat, because the trv could stop the room stat from doing its job

no you need a room stat for building regs

check the bench mark or see if theres any old certificates with it and check the dates on them. It should be checked every year. make sure theres no smell of gas. thats prob about it from a homeowner point of few. but remember youll not smell carbon monoxide so for your own peace of...

it is not suposed to be turned off, because if its turned off it defeats the purpose of the room stat,

If you turn the hall trv off then your boiler will not be thermostaticaly controled. Its been designed to save the householder money and its also for comfort. if ya really want ya could just ignore what the experts have to say, you could even fit two trvs to the hall rad if ya want. how...

if your in doubt mate get an rgi in to check it over for you, should be done every year any way

you should not have a trv fitted in the room were the room stat is fitted, usually the hall.

what boilers do you like

y

lol cheers lads so 7 bar then

part center

dont touch vokera with a barge poll. If your gonna fit a gas boiler fit a worchester cdi. you can modulate the heating temp through the board for your ufh. But if your planning to stay in your house for a long time and have a few quid in the bank go for a ground source heat pump and solar...

hi. Im going to get into oil boiler servicing bought my self all the gear there, But I was told the pump pressure should be about 9.5-10 bar but i see on other posts people are saying 8 bar. does it change from pump manufactuer to pump manufactuer. I was also told that the pressure would be...

15mm pipe in pipe would be a better job

whats barrel :shock:

im working on a gw 24ci. the problem was the there port vavle leaked water into motor and blew it up, so i changed cartlige which stoped leak, and changed the motor. still not working, the pin in the motor is not coming in or out, it says in the manual that the voltage for the motor...