Search results

the benchmark section is complete yes. Rads are all on '6'. apart from the 3 evohome smart ones, which I cannot tell... The boiler still cycles to '1'. Blue valve is horizontal (points at me)

air removed. Water is now at the bleed valve.

6L of water drained. pressure now reads 1.5.

sill unsure is blue handle is in correct position. When the black valve is in line with pipe, (only one black valve) main display reads '3.1'

when power is off, the number reads 1.8. when I open the black handle valve, the preasure on the unit is reading 3.0 and rising. found bleed key point... open several turns for a few seconds?

Powered off and on again..... '1' in the window. leave off for longer?

It made promising noises at various points when cycling the buttons etc though..

blue valve turned horizontal...... no effect yet. not sure how to check system pressure/ air bleeding

Hi Razor, done..... says 'p' then '5', then '3', now '1'

razor- are you saying flip the blue valve?

when turning the power back on to the boiler, it cycled 2, 3, 4, 7 and is now blank. Green light on BDR. next... Held down spanner + reset for 15, and pressed + till screan reads '15'. spanner screen reads- '1' main screen reads '2'

This should work- Boiler- https://drive.google.com/file/d/0B1rGy4TVaLlnX1ZnWW9naklRQ2M/view?usp=sharing BDR-91- https://drive.google.com/file/d/0B1rGy4TVaLlnVFhCZm9IUEJCelE/view?usp=sharing

Inside BDR-91 - https://drive.google.com/open?id=0B1rGy4TVaLlnVFhCZm9IUEJCelE Wiring to boiler - https://drive.google.com/open?id=0B1rGy4TVaLlnX1ZnWW9naklRQ2M 6 to A (grey cable) 7 to B (black cable)

link wires A and B to check?

Evohome rebound. BDR91 has sold green light. If I turn the black valve on the end, Im not going to screw anything I haven't already screwed? lol.:whistle: Boiler says c-on. no numbers in the 'spanner' window or anything. no sound of firing or any effect yet.

Im going to ask some thick questions here, but whats the correct position for the blue handle? Am re-binding system now...

It never made a sound of starting up ect when I wired in the thermostat. I listened carefully. How am I going to know? I should have asked more questions before I installed! It is what It is now I suppose.:cry:

Hello! BDR has green light on solid. Flashing red light (on 3 seconds, off 3 seconds) The receiver unit looses connection once every few days, but I assume this wouldn't be a factor. Boiler reads the time on the display. No fault codes or anything. I can turn the DHW on and off, and change the...

https://drive.google.com/file/d/0B1rGy4TVaLlnY0Yxdm1qa0FYcm8/view?usp=sharing

Hello all, I cannot get my intergas 28/24 to fire up the heating. Direct hot water works fine (taps etc) but I haven't got the heating to fire even once since it was fitted. Background: My project home was a derelict home 2 years ago, I am slowly renovating it to a good standard in my own...