Search results

Hello tried a different same value capacitor and it was still the same, so I suspect it is the speed sensor. This is buried inside the plastic pump housing but managed to get it out. Seems a very simple circuit board with a hall effect sensor I think and couple of resistors. It seems to have...

My struggle with this diswasher goes on..... :cry: I had the motor out and that all looks fine, but there is a pressure sensor that sits on top of the pump. It has two inlets for the water from the pump and two sets of electrical connectors blue & brown channel. I am not sure exactly what...

Does anyone have a electronic copy of Miele Dishwasher Service Manual for any model that is less then 5 years old. Just need some guidance on the sequence to follow to get the recirculating motor out.

I recently took a punt on this second hand dishwasher for less than £50 with a problem that it would frequently show F67 error code. The machine previously has had a leak and one of the signal electrical connections on the motor was corroded. Since changing that I have not seen that error...

The debate seems to have widened a bit!! :roll: But no matter lots of good info. The boiler I have was a replacement for an indirect system and not sure how well the system was cleaned, before the combi put in. Just in case I want to give it a thorough cleaning, what is the best product to use :?:

Ohh........that's not what I wanted to hear. I thought one of the advantages of a combi was that the DHW would be at mains pressure. Is there anything I can do to increase the flow rate or is that the best I am going to get :cry:

Thanks for coming back. It makes more sense now you mentioned that these boilers have a flow regulator. I looked at the spec and it has two settings: DHW dt 35c with flowrate 11.5l/min & factory set dt 42c with flowrate 9.6l/min. I suspect mine is set at the factory default of 9.6l/min...

Hi, I am newbee to this site, but before I call the plumber I thought I would try you guys. Moved into a flat with this combi boiler, which is less than 12 months old. Every thing seems to work ok, except the presure at the hotwater tap is not very high, bit of a pain with the shower. I...