Search results

Me again. Well, I've used the PTFE tape and silicon and the actual joins seem watertight. However my problem now is getting it sealed between the bath and the top of the pipe. I have a foam seal, but it is a bit torn as the fitting is really tight. Am I better to leave this one on and...

ok excellent, thanks

Cheers breezer, I'll get silicon wherever I can!! The sealer I have is a bathroom sealer, I assume 'proper' silicon is the clear stuff?

I've replaced my current bath outlet and overflow with a new kit. It is a tight fit, as there is very little (if any) clearance between the new pipe and the concrete floor. There are a few odd leaks, not much water comes out. As the area is so tight it is difficult to get a good coverage...

Ensure the waste pipe for the washing machine is at a high enough gradient. I had the problem whereby the waste from the washing up bowl was going back up the waste pipe of the washing machine, which made a lot of smell. Mine was actually blocked with grease and gunk from the sink. Hope this...

Appreciate it mate. Rob

Great, I didn't realise you could use 'any' timer, so that helps a lot. If I cannot get one quickly I'll go down this route Cheers Rob

I have now bought the above (reconditioned) but it does not have a timer with it. My current boiler is on it's way out, so I need it fitted quickly. Two questions: 1. How much is a timer for this boiler, a simple 24h 7day timer 2. My plumber can fit the boiler fairly quickly, is it a...

Thanks mate, I'll give it a go tonight.

It seems cold radiators is a common problem on here. My problem is that the pipes leading to two of my radiators is also cold. I have tried bleeding them, one of the downstairs ones came out with lots of black water. Does this mean there is a blockage somewhere else in the system? I...