Search results

Oh my god. I put my drier on the underneath and it started to click,after 2 or 3 min's. I carried on and it come on and is working. I cant believe it. THANK YOU GUY'S

Make sure , red cap on top is on ,and have tried getting a hairdryer on the pipe were it has a G for gas on the metal jig were the pipes come through to boiler.,dry that ,but the gas valve is the main one you do,its the part in front of you as you take the front off , or take the bottom panel...

just 1 question , how old are you and how long in this game

If i met you id take your eyes out,your horrible,a creature,a piece of ****,and obviousley bent

Namesag,i got £190 for that job,i could have paid full wack for my fan,and today i had to get a flue extension and get back there and sort it out,oh ok ill pay for it,sorry someone didnt do it 6 yr ago,my fault, ok dickhead ,

Yes,it was 4 " gap,that had been there for 6 years and had been serviced by b/gas, 3 years on the run until 2006,had worcester lads out 4 times since fitted,and hadnt been found,it was burning perfect when i was there yesterday,telegan v2 analyser was showing no proplem's,so how for 6 yrs has it...

You havent a clue have you,do you know p/center buy them for £3.30 a pair,then they sell them to other suppliers for maybe £5,you want to start learning and asking for things .

I just like to ask if you would have found this right away. I went to a worcester 24 i yesterday,and the fan was stuck,cleaned it and it went for a while then stuck and we changed it. I stayed and tested h/water and c/heating anyway , today a call " no h/w or c/h". Went back and this had been in...

Ive been out from 7.15 am , called home for a hour in the afternoon,then was out until 5pm,out again at 6.45pm-7.45 pm.and bulldog's are not what you say,in p/center they may be dearer but not in my supplier's.I always get the best price he can give because he's only a local bussiness and im one...

Gas 4 u , do myson do a rad over 4 ft high ?

Elite i say " well done", the rest will say" your cutting corner's". I know lad's who can go to job's and just do it,were other's spend until 10 am talking about the job,other's will have the old boiler out,new one up,flue in,old hole bricked up and have old rad's down ,& new ones up.

In my suppliers , normally there highest is 28", although we did fit rads that were about 6ft but they were for show,not for heat.We also had to fit 2 32"x28 (high) ,on top of each other,he got them up, then were they joined he got them boxed across , just were the bent m/l x copper fitting,s were.

You should have a hole there,force the ****e out,your old part will be ok,more than likely

its blocked,before the start of the female thread try a bit of thin wire or turn it on without the part on and see the pressure of mains water

were in liverpool are you and ill tell you were to go to

Lift board,get 2 speedfit isolating valves cut the pipe bang valves on ,in off position remember,then drill 2 new 19mm hole,s in floor and use old pipe with a bit cut off and away you go,1/2 hour job and its done

O.k, then here it goes,(2) 36x24 k2= £48 x 2 = £96.00., (1)48x24 k1 =£37 .,(2) 40x24 k1=£31x2=£62.00., (1) 24x24 k1= £19.00.= £214 £214. I got my boiler for £ 635.00,inc flue,timer and loop. I have spent £ 849.00. With having to buy trv's and l/shield's at £7.00 x 6 = £42 and 2 more for towel...

It soundis like your fan has a proplem,or your venturi,Is it firing so you know your aps is ok,what syptoms is it giving

Properly running tofast through shower.if its no better with mains off to shower,was it ok before ,was it off a conventinal system then?,is the hot ok elsewere