Search results

Great, thanks for the reply. Much apreciated. So except £50 there isn`t much else between the sheds!? (and the lack of door braces!) Just seems a big difference in price for 2 very similar looking sheds. Davey

Any advise on any of these :- http://www.shedsworld.co.uk/p/Empire_6ft_x_3ft_%281.82m_x_0.91m%29_Bike_Store.htm http://www.shedsworld.co.uk/p/Rowlinson_6ft_x_3ft_%281.76m_x_0.83m%29_Overlap_Pressure_Treated_Bike_Store.htm...

Great, thanks for replies guys. Advice appreciated.

Any advice for a beginner looking to get a shed? Buy a B n Q one, build one etc? I was considering cementing an area of my grass and building a shed for storage. Any tips or advice welcome! Cheers

Cheers, I`ll try that. Is there any way I can tell if my boiler is heating up the water to the required temperature? I wondered if the temp might be too low, even though I have the dial on the front turned up to #4 :\

Also, the system has also been balanced within the last 6 months apparently! Another thing I checked was that the thermostatic valves were worked properly and not sticking shut.

Hi, any help appreciated. I`ve got a Worcester 28i RSF combi boiler, approx 12 years old. Boiler in good working order (I think!), I`v based this on fact hot water is fine and most heaters are nice and hot. Problem I`m finding is the few rad`s furthest from the boiler are not nearly as hot as...

Hi thanks for the reply. Yeah the cap is in one piece, and both the pipes are not blocked and not leaking.

ok, thanks, taken onboard. Anyway, does anyone else have any ideas before I call out someone? Cheers

Sorry but RGI? I take it thats just a registered person, is it? It was actually serviced by an authorised person in August

ok, I take it its something more serious than an amateur like myself can rectify? I`ve repaired some minor problems in past such as sticky fan, replaced APS, pump, but Im starting to think this may be over my head this time. thanks

Thanks for the reply. I cosidered that. If the PCB is faulty should the air pressure switch still not `make` and then the start up sequence fail somewhere else on start-up? Also wondered if the fan might not be operating at its full capacity therefore not `making` the air pressure switch, any...

Hi there, this is my first post, hoping someone out there can help me! I have a Worcester 28i RSF Combi which is not igniting. I have fitted a new Air Pressure Switch but still same problem. If I remove white pipe from connector and suck into pipe then switch clicks and boiler ignites no...